• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What is this?

  • Thread starter Thread starter JBeezy53
  • Start date Start date Feb 5, 2006
  • 1
  • 2
Next
1 of 2 Next Last

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#1
  • Feb 5, 2006
  • #1
Just found this sensor under my upper intake, it was zip tied to a vacuum hose. I think its was water temp sensor but there is already one on the lower intake with another wire connected to that. My water temp guage works.

 

Attachments

  • Picture113a.webp
    31.3 KB · Views: 179
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Feb 5, 2006
#2
  • Feb 5, 2006
  • #2
Looks like the AirCharge Temperature sensor.
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#3
  • Feb 5, 2006
  • #3
Where does that go? What does it do?
 
P

PRO50SC

New Member
Dec 28, 2003
1,012
1
0
Olney, Maryland
Feb 5, 2006
#4
  • Feb 5, 2006
  • #4
Daggar said:
Looks like the AirCharge Temperature sensor.
Click to expand...
+1
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Feb 5, 2006
#5
  • Feb 5, 2006
  • #5
yep ACT sensor. usually goes in the intake charge on the number 5 intake runner. other cars have them in other places like the intake tube before the throttle body.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Feb 5, 2006
#6
  • Feb 5, 2006
  • #6
Yea thats the ACT Air Charge Temp sensor, it goes in the number 5 inlet intake runner(should be right by the number 5 or 6 fuel injector). You would have to take the upper manifold off to install/remove it. Im assuming the hole has been plugged or else you would have one big vacuum leak...The sensor is connected to the computer and helps with the proper air/fuel mixture (i think) the colder the air it senses the more fuel it puts in. I would fix that right away. you might gain a few mpg if u get that back in there, but might lose a tad bit of power? I think there was a little gadget on ebay somewhere that would give the computer false air temp reading which would put in little more fuel and supposedly give u a few ponies, but i never liked that stuff
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 5, 2006
#7
  • Feb 5, 2006
  • #7
Hmm, black steel valve covers on an '89?

You running an Explorer Intake? That coule be why the sensor is not installed in the manifold. If there is no hole drilled for it, extend the wiring and install it in the Air Inlet tubing.
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#8
  • Feb 5, 2006
  • #8
Ok, new problem. Does the ACT sensor go on the upper or lower manifold? I looked at some stock lower manifolds on ebay and there was a spot to the inside of the 5th runner, well on my intake it is flat right there. The hole was never cast. But if it goes into one of the holes on the bottom side of the upper intake I have an open hole there that has a steel plug in it. So is the ACT sensor on the upper or lower manifold? I'll get a pic of the lower.
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#9
  • Feb 5, 2006
  • #9
Mustang5L5 said:
Hmm, black steel valve covers on an '89?

You running an Explorer Intake? That coule be why the sensor is not installed in the manifold. If there is no hole drilled for it, extend the wiring and install it in the Air Inlet tubing.
Click to expand...

Yep black steel covers. I'm runnin a stock intake. (I think, read post above)
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Feb 5, 2006
#10
  • Feb 5, 2006
  • #10
JBeezy53 said:
Ok, new problem. Does the ACT sensor go on the upper or lower manifold? I looked at some stock lower manifolds on ebay and there was a spot to the inside of the 5th runner, well on my intake it is flat right there. The hole was never cast. But if it goes into one of the holes on the bottom side of the upper intake I have an open hole there that has a steel plug in it. So is the ACT sensor on the upper or lower manifold? I'll get a pic of the lower.
Click to expand...

Yea anywhere that gets airflow
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 5, 2006
#11
  • Feb 5, 2006
  • #11
JBeezy53 said:
Yep black steel covers. I'm runnin a stock intake. (I think, read post above)
Click to expand...

I don't think you are. I think you have an explorer intake. The stock intake does have the hole for the sensor cast, the explorer does not.

Plus the black Valve covers are not stock either.

take pics of your intake/engine
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#12
  • Feb 5, 2006
  • #12
My Intake


No hole on lower intake


Hole on bottom of upper intake-plugged
 

Attachments

  • Picture116a.webp
    76.3 KB · Views: 93
  • Picture117a.webp
    90 KB · Views: 119
  • Picture118a.webp
    15.2 KB · Views: 140

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 5, 2006
#13
  • Feb 5, 2006
  • #13
WTF?

Something is up with your intake. That is a stock 5.0 intake, but that hole should be drilled. Perhaps that's a 5.0 marine lower intake.
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#14
  • Feb 5, 2006
  • #14
Well all this makes me wonder about the rest of my engine. I do have a Performer intake and TFS stage 1 cam I'll be putting in, I'm just waiting to get heads. Were Mustang 5.0 HOs the only 5.0s that had forged pistons?
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#15
  • Feb 5, 2006
  • #15
Whats this electrical wiring above the 5.0 plaque? I see other peoples cars don't have them, can I get rid of it?
 

Attachments

  • Picture116a.webp
    76.3 KB · Views: 117

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 5, 2006
#16
  • Feb 5, 2006
  • #16
JBeezy53 said:
Whats this electrical wiring above the 5.0 plaque? I see other peoples cars don't have them, can I get rid of it?
Click to expand...
 

Attachments

  • Picture116a.webp
    76.3 KB · Views: 148

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 5, 2006
#17
  • Feb 5, 2006
  • #17
Though I have not seen them before, it kinda looks like you might have the 10 pin extenders (the extra electrical connectors you are asking about).
 
M

murphmaster5

New Member
Oct 2, 2005
115
0
0
PA
Feb 5, 2006
#18
  • Feb 5, 2006
  • #18
the white and black connectors above the plaque are the connectors for your fuel injectors amongs other things it also looks like theres two sets of them.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 5, 2006
#19
  • Feb 5, 2006
  • #19
I should have clarified my post, after reading MM's. He might have answered the question - I was lookin at the connector behind the 10 pins. The front ones (vertically mounted) are the stock 10 pins, like he said.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 5, 2006
#20
  • Feb 5, 2006
  • #20
Yeah, it was a recall for 89-later Mustangs.

WHen the engine twisted when it revved, it tended to pull the 10-pin connectors apart. So Ford's fix was to install an extension harness.

If you pull the harness out, you can see you can remove the extension and clean that area up a bit. If you unclip then from the intake and tuck them down, you won't have to worry about them pulling out
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Engine Standard or hi flow water pump?
  • AnthonyA1234
  • Sep 28, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
432
Fox 5.0 Mustang Tech Oct 9, 2026
2000xp8
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
630
Fox 5.0 Mustang Tech Jun 21, 2025
limp
L
Engine New guy heater hose question. 85 gt 4bbl.
  • linemech31
  • Jan 17, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
470
Fox 5.0 Mustang Tech Jan 20, 2026
General karthief
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
220
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?