What kinda numbers, times would you expect w/this combo?

Ok, after about 3 years, i finally put the funds together to do the motor, and this is a run-down of the parts list------

302 shortblock- Forged pistons and rods
AFR 165's
E-303
Trick Flow Street Heat intake
crane 1.6 adjustable roller rockers
70mm tb
73mm MAF
Adjustable FPR
Cai
24lb. injectors
3.73's
street tires

Anything else i forgotjust throw it at me. The motor should be finished within a week or 2, and i'm sooo anxious to get to driving. and hoping to pull 300 at the wheels after a good tune, and run sub 13 sec. times, are these reasonalbe goals??? Thanks for all ur help guys.
 
why street tires? throw some nittos on, underdrive pulleys, your signature says you have exhaust.. to make the most of your combo you might want to get longtubes, why not go with a pro-m 77mm or 80mm maf? 300 could be achievable with that combo, maybe get a custom cam done, with a heads/cam combo you could run the trickflow track heat intake instead of the street heat
 
The reason I said street tires is bc thats what i have now, and after this project i am finacially drained, and need some time to get funds together. The underdrives are a definite that i will be getting soon, but i'm just listing what i have now, when i ran the car bone stock, i ran a 14.9, and the last time i ran a 16.2. the motor was headed far south, so i figure i should pick up quite a bit, but if i'm stuck in the high 13's i will be real dissapointed in the car. I mean the way the car feels is a lot of it, but to spend all this money and get beat by a near stock LT1 would just ruin it for me. :notnice: What kind of difference would i notice in a custom cam?? and would i be able to use it if i get nitrous later? i'm lookin at a zex 125hp. shot. and hoping for low low 12s w/that. I don't think it's far out of the question, but i want other people's opinions, maybe people with similar combo's. thanks guys, i'll keep ya posted when the engine's done.