• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

what rack&pinion do i have?

  • Thread starter Thread starter trevnut
  • Start date Start date Jan 19, 2004

trevnut

Member
Dec 21, 2003
67
0
6
Mustang,OK
Jan 19, 2004
#1
  • Jan 19, 2004
  • #1
i need a new rack and pinion and dont know which one i need. they ask me if it has 1 bushing or 2. and they also ask if it is the performance suspension package or regular suspension. i have a 91 lx coupe i with the 5.0 in it please help!!!!!!!!!!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jan 20, 2004
#2
  • Jan 20, 2004
  • #2
when i did this for my 88gt, there were 4 choices. ford performance (quick ratio) and regular, and TRW reg and performance. for the performance, i bet the gt's all had performance. for me, if it had the bigger wheels and tires, it had performance (on the door "tire pressure" sticker.

for the brand/type. i cleaned off the back of the rack, below the steering linkage. it has the part number there. go from that.

good luck.
 
G

goldbomb79

Member
Jun 4, 2003
374
0
16
Indiana
Jan 20, 2004
#3
  • Jan 20, 2004
  • #3
ok the diff between 1 piece and 2 piece bushings is just that. where the two bolts hold the rack in place there is either a 1 piece or 2 piece bushing in each of those holes. when you pull the rack see if there is one long rubber bushing or two halves in each side. hope that helps ya.
 
W

wiggy's5.0

New Member
Jul 14, 2003
54
0
0
Jan 20, 2004
#4
  • Jan 20, 2004
  • #4
The previous message is right. Either you have a one piece bushing in the mounting holes or you have two seperate ones in each hole. I changed my rack out on my 87 5.0 lx and I had the trw rack with the one piece bushings. The guy at napa ordered me the rack with two bushings, so I just put the old ones back in. Down the road I should probably go with the polyurethane bushings, I heard they make a great improvement in handling. Good luck hope it works out for you.
 

93 teal terror

Founding Member
Jul 13, 2001
971
62
69
Durham N.C.
Jan 20, 2004
#5
  • Jan 20, 2004
  • #5
If you get the non performance package, it will drive like a cadilac....ask me how i know lol. Its the 4cyl rack. Even stock tires and rims rub a little with this rack. Get the performance one.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jan 20, 2004
#6
  • Jan 20, 2004
  • #6
i think the hi per rack requires the higher pressure pump. i very well could be wrong. just want to toss that out for somone more knowledgable than i can answer. dont want to create more work than necessary. anyone know?
 

ShallowGrave

Founding Member
Sep 30, 2001
371
0
16
Philadelphia
May 15, 2004
#7
  • May 15, 2004
  • #7
my question is related to the questions above. I want the performance rack. Autozone lists 2 racks, 1 with a 2.5 ratio and one with a 2.25 ratio. Which one is the performance rack?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
May 15, 2004
#8
  • May 15, 2004
  • #8
should be the latter rack.
 
N

noslow5_0

New Member
Nov 7, 2003
422
0
0
dallas tx.
May 15, 2004
#9
  • May 15, 2004
  • #9
the 2.25 is the high performance rack... the only difference is a slightly quicker responsive steering... when i replaced mine, i ended up getting the performance rack for the price of the regular since oriely's was outta stock at most of there locations... have fun doin it. not that its really a big job...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
May 16, 2004
#10
  • May 16, 2004
  • #10
noslow5_0 said:
the 2.25 is the high performance rack...QUOTE]
i thought i said that. J/K

be prepared to deal with the bushings too. many racks dont come with the correct bushings (one or two piece). might want to round some nice stiff aftermarket units up beforehand.

good luck.
Click to expand...
 
You must log in or register to reply here.

Similar threads

G
79 steering rack problems
  • garyrc
  • Mar 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
115
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 8, 2026
AeroCoupe
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
53
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
B
Rack and pinion options
  • Bronco Bart
  • Sep 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
549
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
AeroCoupe
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
626
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
B
Take a look at my rack!
  • bicknell
  • Sep 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
627
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?