What spark plugs for a Supercharged 2V?

4.6 Rocket · Jun 7, 2006

I finally ordered my Vortech for my Bullitt and I should be installing it this weekend . My question is, what type of spark plugs should I go with and at what gap? Also, if you guys have any other suggestions about installing it, my ears are open.

Thanks!

damacman · Jun 7, 2006

NGK TR6, they come gapped at 35 thousanths - perfect!

damacman · Jun 7, 2006

My only suggestions would be:

1. Make sure your gas tank is nearly empty to make the install of the fuel pump easier
2. Have on hand the correct punch and tap so that you don't have to have the wife go to 11 different ace hardwares to find it while you're working
3. Have patience when massaging the A/C lines out of the way of the blower mount / housing
4. Call your tuner and have an appointment to get it tuned after your install so you don't have to wait a week or two for them to fit you in . . .
5. Be prepared to get some 12 second time slips

Dope 97GT · Jun 7, 2006

damacman said:
NGK TR6, they come gapped at 35 thousanths - perfect!

I heard the same thing I am goin to be putting in my vortech next week as well and them are the plugs i am going to use same gap too.

Firemanz I beleive uses them as well.

BTW not to take the thread but what tap size do I need I heard there was some confusion on the actual size?

Firemanz · Jun 8, 2006

Dope 97GT said:
I heard the same thing I am goin to be putting in my vortech next week as well and them are the plugs i am going to use same gap too.

Firemanz I beleive uses them as well.

BTW not to take the thread but what tap size do I need I heard there was some confusion on the actual size?

Yep, NGK TR-6's for me too. My tuner (Mike Murillo) said they're perfect for our set-ups.

Gearbanger 101 · Jun 8, 2006

I have no experience with the NGK's. I went with a set of AWSF-22C's (one heat range colder than stock)

Might opt out for a set of AWSFA 12C's (two heat ranges colder than stock) when I really start to spin this thing.

I stay away from platinum plugs and stick with the copper ones. They're better performing and cleaner burning. Who cares if they won't last 160,000km like the platinum ones do. Who actually runs that much mileage on a set of stock plugs anyway?

Marks5.0! · Jun 8, 2006

yup NGK TR6 are the plugs to get

Dope 97GT · Jun 8, 2006

do you guys use the iridium ngks or just the regular ones?

Marks5.0! · Jun 8, 2006

i use the plain NGK's the ones that are like a 1.19 a piece lol

tradde · Jun 8, 2006

I installed the Iridium ones. KB recommended those. No problems, but were expensive.

Dope 97GT · Jun 8, 2006

wheres the cheapest place to get the ngks and i also need some new plug wires

I was thinking steedas 9mm or FRPP 8mm

Gearbanger 101 · Jun 8, 2006

How about a big set of ultra-macho Taylor 10.4mm wires.

http://store.summitracing.com/partd...908331+4294908282+4294924746+115&autoview=sku

.....and for just under $100, I might add.

Although you will need a set of these to go with them http://store.summitracing.com/partdetail.asp?autofilter=1&part=TAY-42769&N=115&autoview=sku your stock ones won't cut it.

Dope 97GT · Jun 8, 2006

these are the ngks i need right? tr6s

http://store.summitracing.com/partdetail.asp?autofilter=1&part=NGK%2D4177&N=115&autoview=sku

Pennywise2 · Jun 8, 2006

Dope 97GT · Jun 8, 2006

just ordered the tr6s and taylor 409 wires for the install of the vortech next week.

Pennywise2 · Jun 8, 2006

Dope 97GT said:
just ordered the tr6s and taylor 409 wires for the install of the vortech next week.

Congrats you will enjoy the wonderfull
top end power that the Vortech gives.

Gearbanger 101 · Jun 9, 2006

Dope 97GT said:
just ordered the tr6s and taylor 409 wires for the install of the vortech next week.

Very cool, I'm sure you'll like the look and power of it all. Just for giggles, I remembered someone over on TCCOA who's got the exact set up you're going for and though I've give you a preview as to how it would look.

It may be a T-Bird, but otherwise it looks like a mirror image of your (soon to be) set up.

....and in case you're wondering, he's making 454RWHP/393RWTQ.

Dope 97GT · Jun 9, 2006

i got the aftercooler too

same style intake manifold too but i think you know that

Dope 97GT · Jun 9, 2006

my mom has an 85 cougar with the 5.0 in it with all the options from the factory its in pretty good condition and she is the original owner

What spark plugs for a Supercharged 2V?

4.6 Rocket

New Member

damacman

Member

damacman

Member

Dope 97GT

New Member

Firemanz

Only you can prevent Forest Fires!

Gearbanger 101

Straight Outta Locash

Marks5.0!

Dope 97GT

New Member

Marks5.0!

tradde

New Member

Dope 97GT

New Member

Gearbanger 101

Straight Outta Locash

Dope 97GT

New Member

Pennywise2

Banned

Dope 97GT

New Member

Pennywise2

Banned

Gearbanger 101

Straight Outta Locash

Dope 97GT

New Member

Dope 97GT

New Member

Similar threads

What spark plugs for a Supercharged 2V?

New Member

Member

Member

New Member

Only you can prevent Forest Fires!

Straight Outta Locash

New Member

New Member

New Member

Straight Outta Locash

New Member

Banned

New Member

Banned

Straight Outta Locash

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency