What valve covers work on our cars???PICS???

I talked to him (Roger) last night...he said his are chrome and they were about $69. ....NO MOD required. Either they are different, or the price went up.
RC

mootang said:

has anyone used these anderson ford motorsport valve covers(with filler spout) with the SN95 throttle body setup?

p/n AF-6582-A1
$119.25

Click to expand...

That P/N is for polished aluminum. Roger's and Joe's are chrome, I think the P/N is PKCVC

94GTLaserRC said:

That P/N is for polished aluminum. Roger's and Joe's are chrome, I think the P/N is PKCVC

Click to expand...

i just looked at afm's site and PKCVC is the correct part number. the covers we have would make 95opals problem a non issue as well since the fill tube isnt fixed on ours. it is sitting in the cover with a rubber grommet.

How in the heck did you guys get your AFM's to fit? My alternator hit the front of the valve cover and needed to set back another 1/4". Otherwise the AFM's cleared my big honk'n dss rollers and pollylocks without an intake spacer. I have a holly systemax intake. I also had the same problem with the fill neck - using a mac fenderwell cold air dealio. Ended up using ford racing covers that have holes on each valve cover, and the screw in tube is in the back, passanger side. Had to hand cut extra gaskets to get the screw ins to not screw out. Other side just has a flat cap. Had to weld a nipple to the fill tube as well for the hose, which i am ending up capping off anyways. (94 gt)

Green 94 5.0 said:

i just looked at afm's site and PKCVC is the correct part number. the covers we have would make 95opals problem a non issue as well since the fill tube isnt fixed on ours. it is sitting in the cover with a rubber grommet.

Click to expand...

The oil fill neck was a minor issue, all I did was turn it about a 1/4 and that gave me enough room to run the vac hose. The alt was tight but I used a couple of small washers to space it away from the valver covers no big deal. It had 0 effect on the belt.