i'm thinking of getting a 00 gt motor which happens to be a windsor motor, well the valve covers aren't going to work because of the pcv system and oil filler. what valve covers would work for my 97gt. thanks
if you can take cover off of car, or have spare, u can get as areative as you want to paint them. I can't find any at the moment, but I've seen pretty snazzy one that people done up.
I like to do that with mine. But eventho i can replace my own clutch, install header by disassembring K-member, Do my own spring install, somehow I can't get my valve cover off of car.
1 bolt i just can't not get somehow
I may be wrong, but I think some of the truck 4.6s, possibly some in the conversion vans, had different locations on the filler necks, etc. Those might help that fit in your 97 a little better.
I'm trying to figure out what i'm going to do with a 00 gt motor (windsor) that will not work with my pcv system. i have pictures of the engine Minus the valve covers. I don't know how to make the pictures smaller so i can post them.
they also have different logos you can have engraved below the oil filler cap, like running horse, 281, I opted to leave it blank. Alos the filler neck was switched to the drivers side from stock covers