• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What will cause vibrations above 4k rpm?

  • Thread starter Thread starter StangBangRicers
  • Start date Start date Feb 20, 2004
S

StangBangRicers

New Member
Dec 9, 2002
58
0
0
Feb 20, 2004
#1
  • Feb 20, 2004
  • #1
It's definetly rpm induced and only when I stomp on it and let it get above 4k rpms. Whole car starts vibrating and makes me cringe... It's an auto and before my rear gear change it never got much above 3k now that I'm hiting the 4k+ zone... I've started to notice it.

I'm thinking it must be the balancer. I checked the timing and it seems accurate, so I don't think it has spun.

Any other suggestions or possiblities before I replace the balancer?
 

IndyBlk5.0

New Member
Nov 24, 2003
1,122
1
0
New Whiteland, IN
Feb 20, 2004
#2
  • Feb 20, 2004
  • #2
when your at idle does the balancer wobble around? only thing that could make a vibration like that is a rotating mass... balancer is my guess.
 
S

StangBangRicers

New Member
Dec 9, 2002
58
0
0
Feb 20, 2004
#3
  • Feb 20, 2004
  • #3
It does seem to wobble a bit... but I'm not sure if it's actually the balancer or just the weight creating an optical illusion.

I think I may just replace it for the hell of it anyways....
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Feb 20, 2004
#4
  • Feb 20, 2004
  • #4
I'd be willing to bet it was the harmonic balancer as stated...you might ought to check your driveshaft...maybe it got warped somehow????

David
 

banditmwp

New Member
Jan 9, 2004
218
1
0
Opelika/Auburn, AL
Feb 20, 2004
#5
  • Feb 20, 2004
  • #5
I had the same problem after replacing the gears, and it turned out to be the driveshaft. I replaced it with an aluminum shaft and the vibration disappeared. Does it vibrate if youre in park/neutral and rev it up to 4k? If not, then i would go with the shaft...if it does vibrate in park, it's probably the balancer.
 

banditmwp

New Member
Jan 9, 2004
218
1
0
Opelika/Auburn, AL
Feb 20, 2004
#6
  • Feb 20, 2004
  • #6
another way to check is to put it in neutral when you reach where it starts vibrating on the road...if the wheels are going 80 and the engine is only spinning 800 rpm and you still have a vibration, then your driveshaft is warped or missing a counterweight.
 
S

StangBangRicers

New Member
Dec 9, 2002
58
0
0
Feb 20, 2004
#7
  • Feb 20, 2004
  • #7
It still vibrates in park... gonna replace the balancer.

Thanks folks.
 

UnderPressureGT

New Member
Dec 31, 2002
2,285
0
0
TR- Jersey Shore
Feb 20, 2004
#8
  • Feb 20, 2004
  • #8
dumb thing, but i had the same prob as u.. vibrations after 4K.. turned out that my stock clutch fan was shot... just take your belt off and rev it up and see if the vibrations gone
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Feb 20, 2004
#9
  • Feb 20, 2004
  • #9
Most likley the Harmonic Balancer/Dampener. Get a SFI aproved one, trust me, it's worth it. The stock one is only rated to 4500rpm and still isn't very good. It is just two iron rings with a rubber layer in the middle. I put a Romac on mine and it is a noticable difference. First of all, it looks alot better, i wouldn't care if looked like poo as well as it works. I never really had any engine vibration, but I noticed it was wobbling. I just couldn't drive knowing the balancer was about to self destruct. When I put on the Romac, I was suprised of how smoothly it revves. I can be at 5500rpm's and it car feels as though it was at 2000rpms, the only way I can tell is be the tach reading and the exaust note. Harmonics reek havoc on main berrings.

FiVeLiTeR87GT said:
dumb thing, but i had the same prob as u.. vibrations after 4K.. turned out that my stock clutch fan was shot... just take your belt off and rev it up and see if the vibrations gone
Click to expand...

Good point, it isn't very likley but a possiblity.

Another possiblilty is the flexplate, I have scene them warp and cause all kinds of vibration, but once again, not likley.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 21, 2004
#10
  • Feb 21, 2004
  • #10
dont mean to jack the thread, but it sounds like it will be pertinent to SBR, and there is a knowledgable audience already here.

what balancer do you like? who has the best price? i dont mind less extreme units - dont see over 3K hardly ever.
 
S

StangBangRicers

New Member
Dec 9, 2002
58
0
0
Feb 29, 2004
#11
  • Feb 29, 2004
  • #11
FiVeLiTeR87GT said:
dumb thing, but i had the same prob as u.. vibrations after 4K.. turned out that my stock clutch fan was shot... just take your belt off and rev it up and see if the vibrations gone
Click to expand...

I didn't have a chance till today to yank the belt.
Sure enough... no vibrations.

You rock man!
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Feb 29, 2004
#12
  • Feb 29, 2004
  • #12
replace the balancer anyways if you have the cash. If it's stock it could be on it's way out someday soon, and new ones make your engine run so smooth it's well worth the purchase
 
You must log in or register to reply here.

Similar threads

L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
216
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
588
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
668
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
572
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
181
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?