Whatcha guys think- Polished GT40??? Pic

monte87 · Jul 10, 2008

Sooooooooooooooo- While preparing the used GT40 i picked up on ebay for Dave "manosnozz" to hook a bro up with some aweseom chrome powdercoating, i was stripping the inatke, and relaized Bammmmmmmmmm-Im hooked now on polishing it instead. Props go out and and large Thanks to "Dave" for hooking a fellow stangetter up when looking for some powdercoating help and in general-being an aweseom guy period. Take a bow, Take a bow!
Here is a pic of almost done polsihed GT40 tubular intake, and thanks to all that helped out-when i needed some new stripping ideas as well.

Later Anthony

monte87 · Jul 10, 2008

This pic is a rough, its about 50% done, still got lots of work-But on my way! I can tell from all the sanding (80-400grit) it will be mirrorlike!!!

monte87 · Jul 10, 2008

pic# 2

monte87 · Jul 10, 2008

pic#3

RARE NOTCH · Jul 10, 2008

Looks killer bro. But i cant see doing tha to my nos one that i have including the cover.

monte87 · Jul 10, 2008

Thanks Bro. yeah-Its not for everybody. For me though-My entire enegine compartment is polished and chromed-So to put a stock GT40 on it-would look out of place.
Later Ant

RARE NOTCH said:
Looks killer bro. But i cant see doing tha to my nos one that i have including the cover.

NIKwoaC · Jul 10, 2008

Looks great. Can we see pics of the rest of the 'bay?

monte87 · Jul 10, 2008

NikwoaC said:
Looks great. Can we see pics of the rest of the 'bay?

Sure in a few days, Im not done yet. The bottom is completely stripped to bare aluminum, everywhere including bottome end bends, the square part that connects tubes, even the welded parts which holds the tubes. i used aircarft stripper to go all the way down to bare. You can see all the welds, marks and all-pretty cool stuff. im very anal about my polishing-It will be polished even undereneath-When i get finished. i will post pics-When im done, My fingers need a break. hahahaha you cannot get any power tools in the crevices which leaves it to your fingers-So its real personal on the craftsmanship apsect of polsihing this badboy!

Later Ant

backfocus · Jul 10, 2008

What method did you end up using to remove the paint Monte? Did the over cleaner work for you?

Looking good on the polishing process. I know it seems sometimes like you will never finish, but it is well worth the effort in the end. Keep up the good work

monte87 · Jul 10, 2008

Oh-you meant the engine bay! hahahah Duhhhhhhhhhhhhhh, sorry-I thought you meant underath the inatke.

Here ya go- YouTube - Ant's Stang

monte87 · Jul 10, 2008

Thats an older pic, but something to loook at-

MrXCESSIVESPEED · Jul 10, 2008

Looks real good thus far, you going to seal it with anything? Id imagine itd be a PITA to maintain otherwise.

monte87 · Jul 10, 2008

Thanks man,
To be honest with you, i didnt even need the scotchbrite pads, I used EASTWOODS paint remover/aircraft stripper and it came off like butter, actually flaked right off without rubbing. rigt down tot he bare aluminum-Even everywhere underneath. Then i started the sanding. Pretty much it. The pics are without appying White rouge yet. Thanks for the kind words, appreciate them

Later Ant

backfocus said:
What method did you end up using to remove the paint Monte? Did the over cleaner work for you?

Looking good on the polishing process. I know it seems sometimes like you will never finish, but it is well worth the effort in the end. Keep up the good work

monte87 · Jul 10, 2008

Probably some mothers straight 100% carnuaba wax always kept my polished parts in good shape for the most part. the car is only a weekend driver, sits in an indoor garage and never see's bad weather. But-Yeah-Its a PUITA to maintain, What do you uise as a sealer?

Thansk Ant

MrXCESSIVESPEED said:
Looks real good thus far, you going to seal it with anything? Id imagine itd be a PITA to maintain otherwise.

Ozz · Jul 10, 2008

nice. i use nothing as a sealant personally. any i've tried yellow/dull. wax might be a good idea, like wheel wax or something like that. if you try that let me know!

Looks great, especially the tubes

monte87 · Jul 11, 2008

Hey dave-

Thanks....

Later Ant

mansonozz said:
nice. i use nothing as a sealant personally. any i've tried yellow/dull. wax might be a good idea, like wheel wax or something like that. if you try that let me know!

Looks great, especially the tubes

Mustang928 · Jul 12, 2008

Good job man... I've polished a few GT-40 in my time

stang22 · Jul 13, 2008

Looks good! Here is some extra motivation, if you need some.

Tim

NIKwoaC · Jul 13, 2008

DEEEEEEEAAAAAAAMN!

Venom351R · Jul 13, 2008

Both of those look good! Its still one of my favorite looking intakes out there. Much better then the knock off explorer hideous POS

Whatcha guys think- Polished GT40??? Pic

monte87

Attachments

monte87

monte87

Attachments

monte87

Attachments

RARE NOTCH

Member

monte87

NIKwoaC

中國製造

monte87

backfocus

Member

monte87

monte87

MrXCESSIVESPEED

Member

monte87

monte87

Ozz

I think I have a problem here.

monte87

Mustang928

stang22

Active Member

NIKwoaC

中國製造

Venom351R

Similar threads

Whatcha guys think- Polished GT40??? Pic

Attachments

Attachments

Attachments

Member

中國製造

Member

Member

I think I have a problem here.

Active Member

中國製造

Similar threads

Privacy & Transparency

Privacy & Transparency