About a week ago, I was randomly seeing a check engine light that would flash on and then go back off really quick usually. I noticed whenever I was giving it a bit more gas than usual (tiny bit) it liked to come on, and when I hit the clutch, a second later it would usually flash back off. Sometimes it would stay off for days, other times it would stay on for like 10 minutes then just randomly come on. I pulled the code, turned out it was a code 32. I cleaned out the ERG valve with tbi cleaner, cleaned out the holes in the EGR spacer and put it back together with a nice new gasket and finally setset the computer. Days went by and I didn't see the dreaded CEL come back on until last lastnight I was driving home and it flashed it's evil face at me again then dissapeared just as quickly. Driving home from school today, I noticed it once more. I pulled the codes and got a code 31 this time instead of a code 32 like before. What's causing this and how do I stop it? It doesn't seem to be doing anything besides annoying me.
Thanks for any advice anyone can offer
31 EVP - (O, R, M) EVP signal is/was out of range -
EVR - (O, R, M) EVP signal is/was low -
PFE - (O, R, M) PFE signal is/was low -
Thanks for any advice anyone can offer
31 EVP - (O, R, M) EVP signal is/was out of range -
EVR - (O, R, M) EVP signal is/was low -
PFE - (O, R, M) PFE signal is/was low -
