• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

What's next after Cowl repair?

  • Thread starter Thread starter dallenx
  • Start date Start date Mar 1, 2006

dallenx

New Member
Feb 12, 2006
36
0
0
Oregon
Mar 1, 2006
#1
  • Mar 1, 2006
  • #1
I've been reading and reading and I have a question.

After the cowl is removed, debris taken out, rust fixed, metal primed and painted and the cowl replaced......then what.

I haven't found the end of the story. Is the original drain enlarged? That won't matter because the leaves and needles will still collect.
It seems like the whole problem will start all over again, maybe it will take 40yrs for the rust to start instead of 20yrs.

Has anyone put a screen under the cowl vents?
 

Platonic Solid

Founding Member
May 29, 2002
1,960
5
39
CT-USA
Mar 2, 2006
#2
  • Mar 2, 2006
  • #2
I attached a screen on top of the cowl chimney to prevent mice from nesting in my heater core.
 

tos

Founding Member
Apr 27, 2001
896
68
59
Cincinnati Ohio
Mar 2, 2006
#3
  • Mar 2, 2006
  • #3
The original problem was Ford did not treat the cowl area properly for prevention of corrosion. Of course leaves and twigs gathered there and helped it along while nobody knew this was going on. We now know that this area should be flushed out when washing your car to keep those drains open. When I did mine I seam sealed everything and primed and painted with good durable paint. Then of course I replaced both floor boards because thats a usual result of the cowl leaking unless your lucky.
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
Mar 2, 2006
#4
  • Mar 2, 2006
  • #4
a lot of the cowls I've seen that were rusted out also had their drains dam'd up with seam sealer blobs.

I had thought of taking, I believe it was, a '87-'92 F-150 cowl vent and welding it in. It's the cowl that's comprised of a bunch of punched holes that are about 3/16"-1/4" dia. I would keep out about everything short of dirt unless a pine needle fell straight down into it.
 

tos

Founding Member
Apr 27, 2001
896
68
59
Cincinnati Ohio
Mar 2, 2006
#5
  • Mar 2, 2006
  • #5
1320stang said:
a lot of the cowls I've seen that were rusted out also had their drains dam'd up with seam sealer blobs.

I've seen that too but thats usually when someone doesnt take the time to take it apart and do it right and instead they pore tar or something else in there without cleaning or properly treating the area hoping it will seal around the vent. If done right you wont need very much seam sealer and it wont come loose.
Click to expand...
 
You must log in or register to reply here.

Similar threads

E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
137
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
136
Other Auto Tech May 31, 2026
LILCBRA
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
393
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
514
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?