• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech

What's the best dual catback system?

  • Thread starter Thread starter Kevin_0
  • Start date Start date Apr 22, 2009

Kevin_0

New Member
Apr 22, 2009
8
0
0
Ottawa, Canada
Apr 22, 2009
#1
  • Apr 22, 2009
  • #1
I have 2007 V6 and am planning on installing a dual catback exhaust system. The biggest problem I'm having is actually choosing one as there seems to be quite a few options out there. So far I'm looking at the Magnaflow and FRPP catbacks.

Has anyone got any insight as to the best options to go dual exhaust? Certainly I realize this is somewhat of a personal preference but I'd be interested in hearing any opinions or other options I may not be aware of. I really like the idea of the Magnaflow as I'm assuming it'll be less restriced but at the same time I'm wondering if it will take away from the throatiness of the sound. It's very difficult to tell based on some of the sound clips I've heard so far. Of course I'm also taking power gains into consideration.
 

sohcman

Member
Aug 4, 2006
73
1
8
Green Mountain State
Apr 25, 2009
#2
  • Apr 25, 2009
  • #2
Kevin_0 said:
I have 2007 V6 and am planning on installing a dual catback exhaust system. The biggest problem I'm having is actually choosing one as there seems to be quite a few options out there. So far I'm looking at the Magnaflow and FRPP catbacks.

Has anyone got any insight as to the best options to go dual exhaust? Certainly I realize this is somewhat of a personal preference but I'd be interested in hearing any opinions or other options I may not be aware of. I really like the idea of the Magnaflow as I'm assuming it'll be less restriced but at the same time I'm wondering if it will take away from the throatiness of the sound. It's very difficult to tell based on some of the sound clips I've heard so far. Of course I'm also taking power gains into consideration.
Click to expand...

True duals are MUCH louder than ones with "Y" pipes.

I have True Duals on my car with Street Pro mufflers (baffled design).

My buddy has a "Y" pipe setup with Violator mufflers (straight-thru design).

Mine is twice as loud as his (but he has very little drone).

Keep that in mind as you parts shop.

GT mufflers are the most quiet (and mixing with a "Y" pipe setup would probably be a waste of $$).

All duals offer about the same "gains"... lots of threads on this...

I saw +2 MPG and quicker throttle response.

Loud as Hell and Loving It...

YouTube - 4.0 Mustang with Pypes Exhaust Getting on Highway in the Rain

Interior noise level 87dB at 85MPH.

 

Kevin_0

New Member
Apr 22, 2009
8
0
0
Ottawa, Canada
Apr 27, 2009
#3
  • Apr 27, 2009
  • #3
Thanks for the info. that sounds pretty sweet. I think I've decided to get a custom true dual exhaust put in with Flowmaster mufflers. I'm also thinking of installing a mass air flow sensor and purchasing a tuner. I've done a bit of research and I really like the sound of the flowmaster. I basically ruled out anything with a Y pipe after doing some reading on the options available.
 

sohcman

Member
Aug 4, 2006
73
1
8
Green Mountain State
Apr 27, 2009
#4
  • Apr 27, 2009
  • #4
Kevin_0 said:
Thanks for the info. that sounds pretty sweet. I think I've decided to get a custom true dual exhaust put in with Flowmaster mufflers. I'm also thinking of installing a mass air flow sensor and purchasing a tuner. I've done a bit of research and I really like the sound of the flowmaster. I basically ruled out anything with a Y pipe after doing some reading on the options available.
Click to expand...

Are the Flowmasters stainless?

I don't remember.

Unless you are getting a really good deal on the "custom" duals, not sure why you'd go that route over a computer-bent set from Pypes or someone else?

The fit would be better than if it was done by "eyeballing" while it was on a lift...
 

Kevin_0

New Member
Apr 22, 2009
8
0
0
Ottawa, Canada
Apr 27, 2009
#5
  • Apr 27, 2009
  • #5
sohcman said:
Are the Flowmasters stainless?

I don't remember.

Unless you are getting a really good deal on the "custom" duals, not sure why you'd go that route over a computer-bent set from Pypes or someone else?

The fit would be better than if it was done by "eyeballing" while it was on a lift...
Click to expand...

Well that was my intial thought. But I'm in Canada and the price of these products are considerably more expensive. The mufflers alone cost about a 100 bucks more each than if I were to buy them in the States. Unfortunatly with the exchange and the duty I'd have to pay it's not really worth having them shipped to my house from a US supplier. So I figured I'd have a local performance shop who sponsors my buddy's race team do the "custom" work for me instead at a better price.

The Flowmasters are not stainless, but the pipes I'm having put in will be.
 
T

The Fang

Member
Sep 11, 2005
602
0
16
Tallahassee Fl
Apr 30, 2009
#6
  • Apr 30, 2009
  • #6
Go stainless dude
 
R

red 92

Founding Member
Oct 5, 2001
130
0
16
chicago
May 3, 2009
#7
  • May 3, 2009
  • #7
I have the frpp kit from ford and i think its great find a dealer by you and get one from there.
 

Kevin_0

New Member
Apr 22, 2009
8
0
0
Ottawa, Canada
May 4, 2009
#8
  • May 4, 2009
  • #8
I was originally going to go with a custom true duel exhaust with Flowmaster mufflers. In the end I decided to go with the true duals from Pypes and the Flowmasters for the mufflers. I'm having the work done towards the end of this week.
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
375
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
556
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
669
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?