• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Whats The Best Gear Ratio For A V6

  • Thread starter Thread starter Alex96stang
  • Start date Start date Sep 21, 2006
A

Alex96stang

New Member
Jun 8, 2006
17
0
1
Chula Vista CA.
Sep 21, 2006
#1
  • Sep 21, 2006
  • #1
HI guys and gals

I am about to change the gears on my car ang i was wondering what is the best gear ratio for a auto transmision and do you know where do i can get the speedo gear that matches the gears on my rear end
 

Give Me TP

Member
Jun 17, 2004
936
0
16
Republic of Texas
Sep 21, 2006
#2
  • Sep 21, 2006
  • #2
I would go with nothing other than 4.10's for a DD street car, but some people are bound to say you should not go higher than 3.73's.
 

Skymarshal

Member
Nov 5, 2004
572
0
16
Dallas
Sep 21, 2006
#3
  • Sep 21, 2006
  • #3
AFAIK, to correct the speedo you need an electronic converter. Since the tranny is computerized, I don't think you can just put a different tooth pinion on your speedo cable.

And I'm going to put 3.73s on my 5-speed. I think that will wake the car up without killing your mileage. IMHO, you don't need 4.10s unless you go to the track regularly.
 

Give Me TP

Member
Jun 17, 2004
936
0
16
Republic of Texas
Sep 21, 2006
#4
  • Sep 21, 2006
  • #4
We have had 4.10's on my wife's 04 V6 automatic for two years now. It's a daily driver and has been on two 2000+ mile road trips, and gas mileage dropped maybe 1-2 mpg. Well worth it for waking up the car in our opinions.

On a pre-98 model I think Alex is correct in needing a speedo gear for his transmission.
 

AP1995V6

Member
Jul 13, 2003
547
1
16
Oxford, MS
Sep 21, 2006
#5
  • Sep 21, 2006
  • #5
5.xx
 
Reactions: Dunmaghlas
A

Alex96stang

New Member
Jun 8, 2006
17
0
1
Chula Vista CA.
Sep 23, 2006
#6
  • Sep 23, 2006
  • #6
Hi Guys and Gals

My car is a 96 V6 convertible with automatic transmision
i was told that they came with diferent gear ratio from the 5spd

so the upgrade depends ons the gears that have now on my car

I have my eye on a set of 3.45's from richmond gear
cause i think that are much better than the 2.73's that i have
plus since is my daily driver and i do drive it a lot
i dont wanna go to wild
 
A

Alex96stang

New Member
Jun 8, 2006
17
0
1
Chula Vista CA.
Sep 24, 2006
#7
  • Sep 24, 2006
  • #7
Does anyone has 3.45’s in there car

And if so there are much better than the stock 2.73’s

and another question what other cars have 7.5 rear ends and with what gear ratios splines they come with
i've heard that the Mustang, Fairmont, Thunderbird, Mercury Capri, Cougar, Zephyr, Ranger Pickup, and Bronco II come with 7.5 but i'm not sure og the gears that they have
I've also heard that bronco II came with factory t-lock

cause i have a friend that works in a junk yard and he can give a very cheap price on the center section of the diff
 

Henceforward

The Avatar Master
Founding Member
Jul 17, 2001
485
0
0
Sep 24, 2006
#8
  • Sep 24, 2006
  • #8
I can't see how getting anything less than 4.10s installed in a slushbox V6 would be worth the money.

I would even run 4.10s in my car if I had to do it again.
 

AP1995V6

Member
Jul 13, 2003
547
1
16
Oxford, MS
Sep 24, 2006
#9
  • Sep 24, 2006
  • #9
4.10s don't make that big of a difference unless you drive 80 every where you go as far as gas is concerned.
 
9

97sally6

New Member
Nov 15, 2005
129
0
0
Sep 24, 2006
#10
  • Sep 24, 2006
  • #10
they dont make 3.45's for the 7.5 rear, unless its a recent thing. get either 3.73's or 4.10's. and to correct the speedo you need either a speedo gear or a speedcal from dallas mustang.
 
A

Alex96stang

New Member
Jun 8, 2006
17
0
1
Chula Vista CA.
Sep 24, 2006
#11
  • Sep 24, 2006
  • #11
i was planin to get the center section of a use rear end cause i got a friend that works in a junk yard so pretty much i need to know wich car have the 7.5 rear end and what gear ratio do they have and in the 2006 frpp they have 3.45's
 
You must log in or register to reply here.

Similar threads

M
4.10 gears = 200,000 miles ?
  • michaelleewebb
  • Apr 1, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
220
SN95 V6 Mustang Tech Apr 2, 2026
michaelleewebb
M
Drivetrain 5th Gear Ratio
  • PonyGTrider
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
1K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Q
L
1996 harmonic balancer crank bolt. Help!
  • Lost in Palm Bay
  • Jul 21, 2026
  • SN95 V6 Mustang Tech
Replies
6
Views
124
SN95 V6 Mustang Tech Jul 24, 2026
Lost in Palm Bay
L
K
Drivetrain '87 5.0 Installing New Ring Gear and Pinion - Pattern Questions
  • karhoot
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
392
Fox 5.0 Mustang Tech May 9, 2026
Mindseye007
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
597
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?