When You change your plugs, do you.....

[94GTLaserRC]

Is it recommended to use a little anti-seize on the treads when putting in new plugs?

When you finally put them in, do you just make them "snug" with a ratchet?

Thanks
RC

 

[slytherin]

A little dollup of anti-seize or 10-30 and I just go snug and about a 1/4 turn more.

 

[final5-0]

RC

Aluminum heads need the anti-seize.

Iron heads just a little oil.

Just snug them down like you said.

Later
Grady

 

[94GTLaserRC]

RC

Aluminum heads need the anti-seize.
Iron heads just a little oil.

That's where I read that before...when you have AL heads

Well, at least I knew I had seen it somewhere.
RC