Where Do These Two Hoses Go?

One goes to the evap sensor and the other to your intake, I believe.

The hose that goes in the back is for evap. It runs from the fuel filler neck to the passenger side firewall and connects to the back of the plenum. There is a smaller hose with a 90 degree elbow and this connects to the EGR valve, the pony's tail is pointing where this one goes. The vacuum line on the front with the red hoses connects for the charcoal canister and Fuel Pressure regulator. The large hose on the front it for the IAC valve. For the most part that should be all the vacuum lines that you are inquiring about. Most of the lines have a formed plastic characteristic and should lay in the engine bay where they go, or they will have a specific fitting on them that will give a clue as to where they go. Hope this answers your questions. Good Luck!