Where to find camshaft dowel pin?

P

pyroman

Founding Member

Jul 28, 2002

480

3

18

Ennis, Texas

Jul 13, 2008

#1

• Jul 13, 2008

• #1

I'm converting a 5.0L roller cam block to carb to put in the 67. I'm going with a mechanical fuel pump but the current dowel pin is too short since it used an electrical fuel pump. I can't get the pin out of the 289 without damaging it so I'm going to need a new one. From what I've found, the engines with electrical fuel pumps used a 1.125" pin? and the ones without used a 1.325" pin? Where can I buy these individually?

Also, what is the best way to press fit them in without using an actual press?

Thanks

 

B

bnickel

Founding Member

Aug 21, 2002

5,640

3

77

lubbock, texas

Jul 13, 2008

#2

• Jul 13, 2008

• #2

you can get the dowel from Ford, Ford racing or Comp cam and maybe Crane cams too. i'd check with summit first after checking with the ford dealer

 

P

pyroman

Founding Member

Jul 28, 2002

480

3

18

Ennis, Texas

Jul 14, 2008

#3

• Jul 14, 2008

• #3

Is that the correct name for it (camshaft dowel pin), or is there another name for it?

 

P

pyroman

Founding Member

Jul 28, 2002

480

3

18

Ennis, Texas

Jul 14, 2008

#4

• Jul 14, 2008

• #4

Just got off the phone with Comp cams and the guy I dealt with said he would send them (2, short and long) to me free of charge! It didn't matter to him that I had never bought anything from Comp cams either. I know it wouldn't have cost more than $2-3, but still it's cool to see business conducted in that way. I'm going with comp cams when I decide its time for something other than a stock cam.

Tips for getting it in? Is the clearance large enough for me to tap it in with a hammer?

 

woodsnake

15 Year Member

Jan 16, 2007

1,352

15

69

Hicksville, NY

Jul 14, 2008

#5

• Jul 14, 2008

• #5

I've always been able to get the old pins out with a magnet. You shouldn't have to apply any 'force', it should slide freely.

 

P

pyroman

Founding Member

Jul 28, 2002

480

3

18

Ennis, Texas

Jul 14, 2008

#6

• Jul 14, 2008

• #6

woodsnake said:

I've always been able to get the old pins out with a magnet. You shouldn't have to apply any 'force', it should slide freely.

Click to expand...

Weird you say that. Most of what I heard is that it is a press fit, and indeed the one in my 289 is very tightly in there but the one in the 302 came out with just my fingers. I was very suprised.

 

B

bnickel

Founding Member

Aug 21, 2002

5,640

3

77

lubbock, texas

Jul 14, 2008

#7

• Jul 14, 2008

• #7

sometimes they will freeze up little when they've been in there a while so you may need to grab it with some needle nose pliers or something and work it out but it's definitely not a press fit

 

M

mustangman1974

Member

Jan 17, 2004

463

0

16

Jul 14, 2008

#8

• Jul 14, 2008

• #8

get a later model 2 piece fuel pump eccentric. That will solve the problem without trying to get the pin out an messing with something. That is what I did when I converted to a late model 5.0/carburetor a long time ago.