Where'd Ya Get Your Kenne Bell

GearHd6 · Aug 15, 2005

Where did Kenne Bell owners buy them from? I dont see many places online that sell them.

gt90stang · Aug 15, 2005

You can only get them from KB or one of their approved tuners/installers.

Good Luck, Don

macx · Aug 16, 2005

I believe Alternative Auto in Michigan sells them, i know they do installs. Also check LaSota Racing in Columbus Ohio

Also

Daniel50 · Aug 16, 2005

you must get from kenne bell

kennebell331 · Aug 16, 2005

WOOT!!! twin screw > centrv

Saleen8786 · Aug 16, 2005

kb blowers for foxes are the s hit

Daggar · Aug 16, 2005

www.kennedysdynotune.com

Hi-Po · Aug 16, 2005

I got mine directly from KB, bought it online and everything was delivered, nothing missing and packaged very well. If you know exactly what you want do it online, otherwise give them a call - ask for Vic - and he will sort you out! I have had mine for three years now and it is my daily driver year round, works like a charm!

Aliate X · Aug 16, 2005

KB's for 5.0s arnt that great actually

KB's earned their reputation from their sucess on the 4.6's. They were good because the 4.6's have good top end, but not much down low and the KB's made up for this and turned the 4.6 into an awesome motor.

On the 5.0 however, 5.0s are torque motors, so its like your fixing a problem that isnt there. Theres a reason cent blowers are so popular on 5.0s and KB so popular on 4.6's......cent = top end power, KB = low end power.

I met a guy with a KB 5.0 and I wasnt impressed at all, mostly by the fact that theirs no whine.

Daggar · Aug 16, 2005

Aliate X said:
KB's for 5.0s arnt that great actually

KB's earned their reputation from their sucess on the 4.6's. They were good because the 4.6's have good top end, but not much down low and the KB's made up for this and turned the 4.6 into an awesome motor.

On the 5.0 however, 5.0s are torque motors, so its like your fixing a problem that isnt there. Theres a reason cent blowers are so popular on 5.0s and KB so popular on 4.6's......cent = top end power, KB = low end power.

I met a guy with a KB 5.0 and I wasnt impressed at all, mostly by the fact that theirs no whine.

Kenne Bell has been around and producing blowers WAAAAAAAAAAY before the 4.6 even became a concept. If your buddy's KB was a 1.5L then I can somewhat understand why it might lack some lustre. When you pull up to a stop light next to a fairly docile sounding Fox and get your ass handed to you while you're awaiting foost boost from a centrifugal or single turbo then it's a safe bet that you've just been waxed by a KB. It's true that KB are notorious torque monsters. I generate 371 ft/lbs to the wheels at just 2300 RPM. Peak torque occurs at roughly 3200 to 3500 RPM where the HP starts to take over. With my stock bottom end and less than ideal heads and cam, my peak HP occurs between 4500 and 5000 RPM. Nice range to shift in, even in the event that shifting (for whatever reason) ends up being a little sloppy. The moral of this story is not which combo will win on the dyno but how you intend to use your car and how much usable total power you'd like to have.

On a dyno... My torque curve closely resembles something like this:

-----------------------------------------------------------------

I look forward to seeing what the end results are once the current engine combo is removed in favor of a Stroker with some nice heads and custom cam (currently under way).

I should also mention that what I've gotten so far has been from just 7 lbs of boost from a Blowzilla over the top of a GT40 lower.

Hi-Po · Aug 16, 2005

Aliate X said:
KB's for 5.0s arnt that great actually

KB's earned their reputation from their sucess on the 4.6's. They were good because the 4.6's have good top end, but not much down low and the KB's made up for this and turned the 4.6 into an awesome motor.

On the 5.0 however, 5.0s are torque motors, so its like your fixing a problem that isnt there. Theres a reason cent blowers are so popular on 5.0s and KB so popular on 4.6's......cent = top end power, KB = low end power.

I met a guy with a KB 5.0 and I wasnt impressed at all, mostly by the fact that theirs no whine.

Aliate, I appreciate your comments but I guess it all depends on what you want - if you are going racing then stick with a centrifugal SC like Paxton or Vortech - but for a daily driver I still think the KB supercharger is the best solution! And, man, without being argumentative I do belive that KB made their reputation from the turbo Buicks years ago and then the twin-screw SC for the 5.0 - but you do have a point re torque and top end. Anyhow, I love the torque on my little 5.0 hatch!

Aliate X · Aug 16, 2005

Appriciate this not turning into a flame fest, just in my opinion I think a turbo/cent sc fits in well with the 5.0s power curves and makes a great all around beast.

GearHd6 · Aug 16, 2005

I sent ya a PM Hi-Po

GearHd6 · Aug 16, 2005

Who's running these on 5.0's?

Daggar · Aug 16, 2005

Nick302 · Aug 16, 2005

If they offered intercooled kits, fahgettabout it. Whats the next step up from the 1.5L, 1.7L? I'd like to see some numbers from the a KB'd H/C stock block.. I will search..

Daggar · Aug 16, 2005

An intercooled KB on a 5oh... Hmmmmm....

kennebell331 · Aug 31, 2005

I LOVE how so many people believe centrifugal are better because they produce more hpower than twin screw. ARE YOU KIDDING!!!! LS1 < my 331 I remember the last LS1 i raced told me that he will **** on my ford.

50gt1988 · Aug 31, 2005

Daggar said:
An intercooled KB on a 5oh... Hmmmmm....

Ok is that a real picture or is that photoshop? If it's real how does it work? I'm building my fox to road course tolerances and am planning on a turbo or s/c setup but haven't quite decided yet. I'm really leaning towards KB but would a KB, Vortech/Paxton, or turbo setup be better for a road race car? Oh and I plan on eventually racing this car when I move to Arizona.

Camman · Aug 31, 2005

Daggar said:
An intercooled KB on a 5oh... Hmmmmm....

mmmm thats sexy

Anyway imho a kb is a good way to go with a daily driver. The IMPORTANT thing is that you combo is matched to work with the FI method that you choose. Anything will work well with a properly matched combo.

Where'd Ya Get Your Kenne Bell

Member

New Member

New Member

New Member

New Member

New Member

New Member

Member

Member

New Member

Member

Member

Member

Member

New Member

New Member

New Member

Attachments

New Member

New Member

Attachments

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency