Cobain03 Active Member Aug 27, 2003 996 0 36 Lexington, Ky Mar 20, 2010 #1 Mar 20, 2010 #1 im getting a new clutch,plate, aluminum flywheel and need to know which specs to get. how many tooth? what size clutch? (10, 10.5) orginal 65 289 engine, 4 spd toploader.
im getting a new clutch,plate, aluminum flywheel and need to know which specs to get. how many tooth? what size clutch? (10, 10.5) orginal 65 289 engine, 4 spd toploader.
2 2+2GT 10 Year Member Apr 25, 2009 3,333 10 79 Southeastern Pennsylvania Mar 20, 2010 #2 Mar 20, 2010 #2 The 10.5 "C7ZZ" replacement is my preference. Available new, it's a direct copy of the 289HP/BOSS 302 clutch.
The 10.5 "C7ZZ" replacement is my preference. Available new, it's a direct copy of the 289HP/BOSS 302 clutch.
Cobain03 Active Member Aug 27, 2003 996 0 36 Lexington, Ky Mar 20, 2010 #3 Mar 20, 2010 #3 i want a littler better then factory. currently has advanced auto stuff and the abuse killed it.
D D.Hearne New Member Sep 29, 2000 11,730 6 0 south louisiana Mar 20, 2010 #4 Mar 20, 2010 #4 You REALLY don't want an aluminum flywheel with what you've got now. BAD idea for a street driven car.
You REALLY don't want an aluminum flywheel with what you've got now. BAD idea for a street driven car.
Cobain03 Active Member Aug 27, 2003 996 0 36 Lexington, Ky Mar 20, 2010 #5 Mar 20, 2010 #5 thanks, i was lookin at the mid grade centerforce to be honest. i just need to know what tooth count and what size disc.
thanks, i was lookin at the mid grade centerforce to be honest. i just need to know what tooth count and what size disc.
65ShelbyClone Founding Member Sep 9, 2000 4,675 38 119 Antelope Valley, SoCal Mar 20, 2010 #6 Mar 20, 2010 #6 157 teeth, 10.5" disk. What gearbox do you have? What rear gears? If it's anything lower than 3.50, the aluminum flywheel will likely make takeoffs a bit of a chore. I drove my '68 briefly with the stock 3.00s and it needed a bit of slip to take off smoothly.
157 teeth, 10.5" disk. What gearbox do you have? What rear gears? If it's anything lower than 3.50, the aluminum flywheel will likely make takeoffs a bit of a chore. I drove my '68 briefly with the stock 3.00s and it needed a bit of slip to take off smoothly.
Cobain03 Active Member Aug 27, 2003 996 0 36 Lexington, Ky Mar 20, 2010 #7 Mar 20, 2010 #7 4 spd wide ratio 3.25 gear
6 68RCodeConv New Member Oct 2, 2003 345 0 0 Houston, TX Mar 23, 2010 #8 Mar 23, 2010 #8 Centerforce II is a good choice. STEEL flywheel. I used a Centerforce flywheel with a late model (10.4") clutch bolt pattern.
Centerforce II is a good choice. STEEL flywheel. I used a Centerforce flywheel with a late model (10.4") clutch bolt pattern.