which gear install kit?

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
yep, another gear question. i did a search, but want to hear some more opinions. im already decided on 4.10's. now, ive found a real good deal on FRPP's, but i can still save $40 on a set of motives. which should i go with. anyone with personal experience. i dont want to know what your mechanic or you brothers friend prefers. i'd like to hear from guys with personal experience.

also, what install kit should i go with? i have an 02gt with 33k. the more inclusive kits are recommended for cars with over 60k, but i dont mind spending a few extra bucks to prevent future problems. then again, i dont want to spend $$ on something that wont benefit me at all.

the basic kit includes: pinon & carrier shims, crush sleeve, pinon seal, pinon nut, ring gear bolts and cover gasket. cost: $46

kit # 2 includes everything listed above plus: pinon gear and carrier bearings. cost: $85

kit #3 includes everything in kits 1&2 plus: axle shaft bearings and axle shaft seals. cost: $149

so, what should i do? :shrug: motive or frpp? which install kit? thanks for the help guys.
 
I have FRPP 4.10's ordered, my opinion is... the Motives are cheaper for a reason. I didn't order any kit at all for my car, because I don't believe I'll need anything unless something breaks, and the FRPP's come with the shims needed anyways. I guess the smart thing to do would have been to order everything and just replace it all. If it breaks I'll replace it then.
 
helty said:
yep, another gear question. i did a search, but want to hear some more opinions. im already decided on 4.10's. now, ive found a real good deal on FRPP's, but i can still save $40 on a set of motives. which should i go with. anyone with personal experience. i dont want to know what your mechanic or you brothers friend prefers. i'd like to hear from guys with personal experience.

also, what install kit should i go with? i have an 02gt with 33k. the more inclusive kits are recommended for cars with over 60k, but i dont mind spending a few extra bucks to prevent future problems. then again, i dont want to spend $$ on something that wont benefit me at all.

the basic kit includes: pinon & carrier shims, crush sleeve, pinon seal, pinon nut, ring gear bolts and cover gasket. cost: $46

kit # 2 includes everything listed above plus: pinon gear and carrier bearings. cost: $85

kit #3 includes everything in kits 1&2 plus: axle shaft bearings and axle shaft seals. cost: $149

so, what should i do? :shrug: motive or frpp? which install kit? thanks for the help guys.
I chose FRPP 4.10 and the Ratech Deluxe kit (car has 70 k miles) and the guy who installed it (considered to be among the best rear-end firms around here)was very pleased with the quality of the parts and the lack of noise. I figured it was worth some extra insurance replacing the bearings at the same time. I had some noise from the rear end before when turning, and it completely disappeared.