which head bolts/studs need thread sealant?

wifehatesit

New Member
Oct 30, 2006
21
0
0
is it all the bottoms? any of the tops? 70#s torque on the bottom , 80 on the tops sound correct for a TFS twisted wedge aluminum head w/a copper gasket? That is the torque specs TFS specifies on their website.

thx.
 
The ARP bolts have a radius under the heads. The washers that come with the bolts have a chamfer cut in them. The radius under the bolt head mates up with the chamfer on the washer. Fail to do this and the bolts will never torque down properly. All the bolts get antiseize under the bolt heads, and everything but the short head bolts get it on the threads. You need Teflon pipe dope or ARP sealant to coat the threads of the short head bolts. The short bolts go into the water jacket and will seep coolant if you don't use the sealant.