• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Which Headers Will Fit? BBK Equal or Un-Equal?

  • Thread starter Thread starter Joey5.0
  • Start date Start date Jul 15, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Jul 15, 2006
#1
  • Jul 15, 2006
  • #1
I am very Confused. I keep getting different answers. I want to buy a BBK Offroad H-pipe, and i need to know what matching bbk Headers to get.....The Shorty Un-Equals, or the Equal Length...?

Also need to know where i can get some Good gaskets not the crappy BBKs.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jul 15, 2006
#2
  • Jul 15, 2006
  • #2
Either one will fit so long as they are shorties.
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
Jul 15, 2006
#3
  • Jul 15, 2006
  • #3
Change your plugs if you go with equals tho man. I've heard there a nightmare to change with equals since the tubes bend around and what not. A couple extra ponies imo isn't worth it if you start having problems and foul some plugs.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Jul 15, 2006
#4
  • Jul 15, 2006
  • #4
I'd go unequal length headers.They make life a lot easier.I just installed a set of BBK's yesterday.Very nice.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jul 15, 2006
#5
  • Jul 15, 2006
  • #5
I had Equal Length, I didn't have a problem changing them. I figured the unequal length's are a bit easier.

Either one of them headers will fit the normal offroad H pipe.

Try FEL-1415 gaskets...
 

Tonys96Cobra

professional deer "mounter"
Oct 28, 2005
19
9
29
Syracuse
Jul 15, 2006
#6
  • Jul 15, 2006
  • #6
The ewuals are a bit more of a pain, but not enough to be a deciding factor. if you ever, ever plan on running some P heads, get the ones that will fit those too. Just in case!!
 

funkytrunk92

New Member
Aug 28, 2003
85
0
0
Indianapolis, IN
Jul 15, 2006
#7
  • Jul 15, 2006
  • #7
has anyone noticed a sound difference between equal and unequal. I have been looking for equals, but I have bbk shorties now and may not waste the time if there is not that much difference. I am all about less hassle!
 

TheBocSez

New Member
Feb 3, 2004
652
0
0
Converse, TX
Jul 15, 2006
#8
  • Jul 15, 2006
  • #8
I may be wrong here, but if he's asking that question, I think he may be confused on what the difference between equal and unequal length is.

Un equal length means the header primaries just run from the mounting flange to a collector and are simply designed to fit, like your stock headers.

Equal length means that each individual primary tube is the same length designed to be a little more like a long tube header. Dont know for sure, but equal length's are supposed to give an increase in both Tq and HP.

As stated above, both will bolt to your o/r H as long as its designed for a shorty style header.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 15, 2006
#9
  • Jul 15, 2006
  • #9
Quote;(Also need to know where i can get some Good gaskets not the crappy BBKs.)click on first link below for gaskets...and you need to realize alot of times its not the gasket that causes the problems its the bolts working loose...click on second link in my opinion these are the best header bolts you can buy..

copper exhaust gasket..
http://www.jegs.com/webapp/wcs/stor...eId=10001&categoryId=13933&searchItemId=17091

header bolts.
http://www.jegs.com/webapp/wcs/stor...eId=10001&categoryId=18991&searchItemId=41193
 

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Jul 18, 2006
#10
  • Jul 18, 2006
  • #10
Will those Jegs Gaskets work on the Un-equals?
 

TheBocSez

New Member
Feb 3, 2004
652
0
0
Converse, TX
Jul 19, 2006
#11
  • Jul 19, 2006
  • #11
Joey5.0 said:
Will those Jegs Gaskets work on the Un-equals?
Click to expand...

The gaskets are designed to fit the ports of the heads and headers, They have nothing to do with equal or unequal length headers. All you really have to decide is which one you want.

The ease of unequal length shortys and the possible loss of a few HP and TQ

or

The slight additional complications of equal length headers for the possibility of a few extra HP and TQ.

Make that decision 1st, use the gaskets that come with the headers or buy some designed for an EFI 5.0 and your done.
 

JChalfan

Member
Nov 27, 2002
551
0
16
Bellevue, WA
Jul 19, 2006
#12
  • Jul 19, 2006
  • #12
I think I remember seeing a dyno test a few years back of equal length vs unequal length (both shorties). If I recall, one made a little more top end power, and the other a little more down low. It wasn't much of a difference.

I have had both equal and unequal length shorties on my cars, and in my oppinion, the equal length were a pain in the ass. They would be a lot easier to install if you remove your smog pump and all its hoses. From what I remember, spark plug changes were not fun.

I always recommend unequal length shorties. They are a bit cheaper, and a lot easier to deal with. If you are planning on keeping your smog equipment, I would definitely NOT recommend equal lengths.

Jeff
 

5LugFoxFanatic

LOVE AND PEACE!
Founding Member
May 5, 2002
1,058
0
36
Arctic Tundra Hell, Twin Cites, Minnesota, USA
Jul 19, 2006
#13
  • Jul 19, 2006
  • #13
Get longtubes. Make a big difference.
 

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Jul 20, 2006
#14
  • Jul 20, 2006
  • #14
I got the unequals and Off road h for now.

Im gonna run the stock gaskets till they start leaking (if they ever do)

Longtubes and offroad h are next.
 

foxbody88stang

New Member
Jun 4, 2006
21
0
0
COLUMBUS,OH
Jul 20, 2006
#15
  • Jul 20, 2006
  • #15
MUSTANG AND FAST FORDS MAGAZINE DYNO TEST THE DIFFERANCE IS ABOUT 2 HORSE HIGHER WITH EQUAL LENTH NOT ENOUGH FOR BIG CONCERN
 

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Jul 20, 2006
#16
  • Jul 20, 2006
  • #16
Would Longtubes With Off road X Flow better than Shortys and a Off road H on a stock motor minus BBK Intake, and bbk ud Pulleys and flowmaster catback?
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Jul 20, 2006
#17
  • Jul 20, 2006
  • #17
are you going to run the nasty used stock gasket u mean? i would just get a standard felpro, no need for a race gasket or anything. I have had great luck with a cheapy felpro gasket.
 

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Jul 20, 2006
#18
  • Jul 20, 2006
  • #18
Napa have stock Fel pros for my car?
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Jul 20, 2006
#19
  • Jul 20, 2006
  • #19
yeah they should, i got mine at oreily, they outa have them in stock.
 

Joey5.0

Member
Feb 13, 2006
313
1
16
Usa
Jul 20, 2006
#20
  • Jul 20, 2006
  • #20
So anykind of gasket for a 5.0 will fit the bbks?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

W
Dipstick
  • wccurtis1963
  • Jun 13, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
278
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
Willybill32
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
865
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
509
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
C
98 mustang keeps popping at idle like popcorn please help
  • Cannron
  • Aug 14, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
242
SN95 4.6L Mustang Tech Aug 14, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?