which spark plug wire?

[96darkhorse]

well its tune up time again and the last time i did it i i bought live wires ( very nice)....which wires should i go with this time? i know with my mods im not gonna gain power out of any certain wire over the other.... i just want a good performance wire..what do you guys recommend? i heard the new ford racing wires are new and improved....what do you guys recommend?

 

[mo_dingo]

well its tune up time again and the last time i did it i i bought live wires ( very nice)....which wires should i go with this time? i know with my mods im not gonna gain power out of any certain wire over the other.... i just want a good performance wire..what do you guys recommend? i heard the new ford racing wires are new and improved....what do you guys recommend?

My guess is the ford racing ones would be just fine. The important thing is that they are new and the contacts are clean.
Scott

 

[ponyboy19]

MSD multi-angle

http://www.msdignition.com/wire_sets.htm#ford

http://store.summitracing.com/defau...earchinresults=false&N=0&target=egnsearch.asp

 

[94opalgt]

i agree with ponyboy19 also go with ngk plugs

 

[wytstang]

I got rid of my MSD wires the multiangle crap ripped from three of the wires. It also has a slight hesitation at idle. Not even a year later I swithed to Taylor wires and the car idles better and cheaper.

 

[ponyboy19]

Yeah the one thing with the multi angles, is you have to plug them in and form them but you can't twist them all around numerous times or the fingers will break. If you form them and leave them there fine.

 

[urban96]

i bought a set of universal MSD wires and cut em all to length. it even came with the tool to crimp on the new ends. i udes to have the ford racing wires but they were too short due to running fox valve covers

 

[1hot5.0]

I have the Ford Racing 9mm wires and I am happy with them. They are a little long, but no biggie.

 

[96darkhorse]

doesent ford racing sell wires specifically for our years???

 

[95COBRA241]

Never had a problem with Ford Racing, now I am also using Taylor 9mm. Some of the other wires i.e. accel caused interference with the radio.

 

[fiveohh94gt]

i like the msd superconductors. i've had them on and off numerous times and havnt had any problem with them breaking and they have a much better fit than the ford racing wires

 

[SuperDust22]

I have had two sets of the ford wires. They are a good wire but way too long. I got a set of the MSD that were cut to lenght. I like them alot.


Dustin

 

[DFG 5OH]

AFM makes a really good wire, i'm oging with them next time, the ford ones are WAYYY too long, it looks like ****, the AFM's are custom fit, and flow really good.