who has nitrous...

[Bullitt00606]

so who does and if so, what kit, supporting mods and power you're making.

i just want to get a list of ideas.

thanks.

 

[97gtblue]

nx wetkit with the purge also..awesome kit and easy to instal...rated at the wheels too..700 bucks with purge kit and fitting and a bottle gauge.. im prolly right around 300 to the wheels with a hundred shot..because im stuck with the slow n/p.i 2v 4.6...

 

[Venom_Nitrous]

Noszle kit, 125 hp jets, NX Gen X2 kit (purge, heater, blow down tube, pressure guage), 20 lb bottle. HP number are in the sig. that was the 850 psi tho so I would say another 10-15 hp with 1000psi.
Edit: Without nitrous, I have 250 rwhp and 290 rwtq.

 

[mustangman9812]

Nitrous Works Wet Kit, 125 hp Jets, Purge Kit, NOS Nitrous Pressure Gauge

 

[BooWFO]

NX wet kit, purge my horsey has a cold hehe, bottle gauge, bottle heater, blowdown tube, TR6 plugs, and everything in sig.
My car is prolly one of the weaker gt's It puts down 226rwhp NA and 348rwhp with the 100 shot.

 

[jeffnoel]

Which kits actually put the rated HP to the wheels? I see Venom Nitrous above has the Noszle kit and only getting 90-100 hp from 125 hp jets.

 

[SliverStang]

somtimes nitrous companys rate their power output at the flywheel. I run the NOS dry kit, 05116NOS and I really love it. I had the NOSzle kit and had nothing but problems with it so I put this kit on and it works fine.

 

[Bullitt0616]

isn't the noszle kit the direct port injection one that everyone salivates for?

how would a normal universal wet system work with my bullitt intake? would there be drilling involved?

 

[blackink00]

i have a nx wet kit w/ purge, gauge blow down tube, and all the mods in my sig

 

[jeffnoel]

how would a normal universal wet system work with my bullitt intake? would there be drilling involved?

Yes you would have to make a hole somewere in the intake tube in front of the throttle body.

 

[BooWFO]

Which kits actually put the rated HP to the wheels? I see Venom Nitrous above has the Noszle kit and only getting 90-100 hp from 125 hp jets.

Can't speak for everyone but my NX kit if anything over delivers. 100hp jets 122rwhp gain.

 

[BooWFO]

isn't the noszle kit the direct port injection one that everyone salivates for?

how would a normal universal wet system work with my bullitt intake? would there be drilling involved?

If you didn't want to drill the intake. Maybe if you could find or have made a TB spacer? then drill and tap that.