• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Will I have a problem?

  • Thread starter Thread starter WhiteSN95
  • Start date Start date Dec 17, 2004
W

WhiteSN95

Founding Member
Feb 12, 2002
142
0
16
Dec 17, 2004
#1
  • Dec 17, 2004
  • #1
There is a guy in my neighborhood who wants to race when i am done with my car. He has a 94 GT with a kenne bell blower on it, it was the 6 psi kit but he put ram air on it so it is making 8psi. The mods are in my sig and of course I will be adding the V2SQ pullied to ten pounds along with an FTI cam with a dyno tune by LaRocca, fox body conversion with a 75 mm throttle body and a pro-m 80 mm mass air. His car has 3.27 gears in it with everything else stock....even the exhaust. The run will be at the track with an agreement to both have drag radials. Should I have a problem beating him cause he is talking ALOT of trash. I dont think I will but he is talking about how much better the kenne Bell is so he will beat me. I know for a fact the mods that are listed for him are the ones he has cause I have been under the car and under the hood
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Dec 17, 2004
#2
  • Dec 17, 2004
  • #2
he doesnt stand a chance...i dont think??
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Dec 17, 2004
#3
  • Dec 17, 2004
  • #3
If he's all stock except the blower and your going to have what in your sig if you can drive he's done. Take his money if you can to make him feel worse.
 

mystang94gt

New Member
Jun 14, 2004
951
0
0
Bay Area, CA
Dec 17, 2004
#4
  • Dec 17, 2004
  • #4
You've got better Heads, a good intake, full exhaust and a good stall. From what I have seen centerfugal s/c perform a lot better at the track because the way the boost increases with rpm's. IMO you should have him handle easily esp since with the auto there is little room for driver error. I'm with wystang tell the man to put his money where his mouth is. I'd say $500 to pay for your dyno tune!!
 
You must log in or register to reply here.

Similar threads

Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
133
Off-Topic Hangout Jul 20, 2026
SchwarzStock
Bought a 2001 GT from My Son
  • Hawkester
  • Oct 17, 2025
  • The Welcome Wagon
Replies
1
Views
262
The Welcome Wagon Oct 17, 2025
gkomo
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
359
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
219
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
286
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?