• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Wiper delay

  • Thread starter Thread starter Jakfon
  • Start date Start date Apr 16, 2018

Jakfon

New Member
Apr 16, 2018
2
0
1
Newport, TN.
Apr 16, 2018
#1
  • Apr 16, 2018
  • #1
I have a 1988 Mustang GT. It has a new multi switch installed. Wiper work. But using the delay the wipers stop at a different position after each cycle. Never in the down position as designed. Is there a relay that controls this or is it built into the wiper motor? Thanks for reading
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,128
10,748
213
polk county florida
Apr 16, 2018
#2
  • Apr 16, 2018
  • #2
Perhaps @jrichker can dig through his extensive resources and explain how the wiper motor delay works
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 16, 2018
#3
  • Apr 16, 2018
  • #3
Windshield wipers – how it works theory and operation

Multispeed windshield wiper operation

The wiper motor does not have a resistor pack inside it. It does have one armature brush offset from the other two and a cylindrical permanent magnet instead of a set of field coils. The two brushes directly opposite each other are the low speed brushes. The low speed brush works in conjunction with one of the high speed brushes to provide a second speed.

Self Parking mechanism:
The self parking mechanism is copper circle glued or stuck on the wiper gear. The circle always has 12 volts on it until the wiper comes to the park position. There are two copper spring switch contacts, one provides power to the copper circle, while the other provides a path to the low speed winding. The power contact always provides power to the copper circle except when in the park position. The low speed contact is always in contact with the copper circle. When power is turned off at the wiper control, the 12 volts continues to flow to the low speed motor brush until the wiper blade returns to the park position.


Interval Governor:
The interval governor is a fancy electronic switch that sends the motor a pulse of electricity that varies in duration time. It always runs on the slow speed motor brushes. Turn the wipers on and quickly turn them off. The self parking mechanism inside the motor makes sure that the wiper blades come back to the park position and stop there. The interval governor does the same thing: it sends power to the wiper motor and then turns it off. The duration of the pulse sent to the motor determines how many strokes it makes before stopping at the park position. If you watch carefully, you will notice the wiper blade speed is constant and never changes when you are using the interval wiper function.

Interval governor module


Interval governor location


Troubleshooting:
All tests done with the ignition switch in Run or Accessory position and wipers on.

1.) Look for constant 12 volts on the red wire on the wiper motor. No 12 volts, the fuse is blown, bad wiring or bad connection. This will cause park problems or no wiper operation
2.) Check the ground. No ground and nothing works, bad ground and you get intermittent operation.
3.) No high speed operation, low speed OK. Look for 12 volts on the Dark Brown/orange wire. No 12 volts, bad wiper switch, bad connections or bad wiring.
4.) No low speed operation, high speed OK. Look for 12 volts on the white wire. No 12 volts, interval governor faulty or missing, or bad wiring. Since this is a pulse and not a steady voltage, a test light used in parallel with the voltmeter may be a better indication of operation
5.) Motor low speed test: Jumper the brown/white wire on the interval governor to the white wire. The motor should run in low speed mode. I haven’t tested this yet, so use caution. If the motor does not run, the low speed brush may be bad.

Do all this and by that time, maybe I’ll have figured out some simple tests for the interval governor…

See http://www.popularmechanics.com/cars/how-to/maintenance/how-to-fix-your-windshield-wiper-motors-2 for more help.
 
Reactions: Mustang5L5

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,128
10,748
213
polk county florida
Apr 16, 2018
#4
  • Apr 16, 2018
  • #4
Thanks joe. I can't seem to locate the resource area with this new setup.
 

Jakfon

New Member
Apr 16, 2018
2
0
1
Newport, TN.
Apr 17, 2018
#5
  • Apr 17, 2018
  • #5
WOW! That is some good info. Thank you very much for sharing it. I really appreciate it. Now I'll look into each component to see if I can isolate the problem. Thanks again!
 
You must log in or register to reply here.

Similar threads

A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
131
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Tuesday at 5:36 PM
AeroCoupe
C
86 Mustang wiper control module bypass
  • csracing
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
837
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 19, 2025
sparkylawdog
S
J
Wipers won't work at all
  • jpfox
  • May 8, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
682
Fox 5.0 Mustang Tech May 16, 2025
nickyb
R
19 GT Window Motor Saga
  • Rcdgl
  • Oct 11, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
105
2015 - 2023 (S550) Mustang -General/Talk Oct 11, 2026
Rcdgl
R
J
89 mustang alarm install to lock and unlock
  • jk66
  • Apr 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
242
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 10, 2026
jk66
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?