wire hiding thread

Do a search for oinkaodeoink and you can find a link to his website in his sig. He has a write up on there.

Do an advanced search and narrow it down to the 94-95 5.0 tech section.

I did a search under "hide and wires" and in the first page there was a slew of good pics/threads on the subject with instructions on how to do it.

The thing to remember is there is no one way to do it. You just have to dive in and start somewhere.

Yeah you really just need to play around with different routings until you find the right way. Good luck, it's not that bad of a job.

depends on what you plan to do with the fuse box. leave it in the same spot, cut a square hole so all you see is the fuse box cover, or stuff it all in the fender. i left it in the same spot and i'm glad i did. i already had to look in fusebox for a fuse.

with my setup, i removed the whole harness and fuse box, cut a hole small enough to fit everything through and still not be visible. mounted the fuse box in the exact same spot. routed the harness in the fender between the rad and rad support to the other fender. only had to extend the passenger corner and head light. everything else fit fine including A/C.