Wire tuck under drivers side fender.

Driver460sz · Apr 14, 2023

Finally got things cleaned up after moving some wires out of the engine bay.

I am happy with it now.

Monkeybutt2000 · Apr 15, 2023

Makes a HUGE difference in the cleanliness of the engine compartment. Have you done the pass. side?

Driver460sz · Apr 15, 2023

Yes. But there isn't much there. Unlike the drivers side with everything on the left being relocated.

Rdub6 · Apr 15, 2023

After doing my wire tucks on the passenger and driver side…… I really can’t stand looking at the harness across the firewall (even though I tucked it under the pinch weld).
Some day the dash will come out and I’ll hide that part too……. Some day!

JD1964 · Apr 16, 2023

Will your fender liner still fit properly? I also want to note that those crimp connectors dont look all the reliable to me. And a couple of the wires look stretched coming off the unreliable crimp connectors.

Driver460sz · Apr 17, 2023

Thanks for the feedback.

Mustang5L5 · Apr 17, 2023

Grab a 1/4" vac line and split it down the long way and use it to line the pass-thru where the red power wire goes through the fender. This will prevent it from rubbing the insulation on the edge and potentially shorting to metal.

Wire tuck under drivers side fender.

Driver460sz

Attachments

Monkeybutt2000

Mustang Master

Driver460sz

Rdub6

So while I wait to figure out my rear end issues

JD1964

there is enough sticking out to grab on to

Driver460sz

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Wire tuck under drivers side fender.

Driver460sz

Attachments

Monkeybutt2000

Mustang Master

Driver460sz

Rdub6

So while I wait to figure out my rear end issues

JD1964

there is enough sticking out to grab on to

Driver460sz

Mustang5L5

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency