• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

wiring guru's please help

  • Thread starter Thread starter fedup
  • Start date Start date Feb 3, 2006
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 3, 2006
#1
  • Feb 3, 2006
  • #1
i did a 5.0 conversion used the 4cyl headlight harness for a few days everything was good put in a v8 harness and now i have no parking lights and the blinkers work way to fast. i also changed to a 140 mph speedo and now my oil pressure is off the gauge its so high before it read fine please help before i do something bad to the car (Purposely)
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 3, 2006
#2
  • Feb 3, 2006
  • #2
fedup said:
please help before i do something bad to the car (Purposely)
Click to expand...

Hey your name fits you.

Sorry I'm no help with that wiring.
 
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 3, 2006
#3
  • Feb 3, 2006
  • #3
JBeezy53 said:
Hey your name fits you.

Sorry I'm no help with that wiring.
Click to expand...

that is the plan i hgave built this car from the bare shell up was red on red 4cyl auto now black on black 5.0 5 speed it has been almost 4 years im just about fed up
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 3, 2006
#4
  • Feb 3, 2006
  • #4
I hope you get it figured out. Sounds like the car is going to be NICE!! When you build it from scratch everything is the way you like it.

Hopefully "jrichker" stumbles across here soon, he always has numerous solutions for this kind of stuff.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 3, 2006
#5
  • Feb 3, 2006
  • #5
The parking light wire color on a GT is brown. It can be found under the dash if tracing wires. I would start at the headlight switch and ensure you have the parking-light output-signal from the switch.

Do all the bulbs work when your TS's are on and are they the correct wattage? Flashing fast can indicate too much juice passing through the flasher relay.

Does your OP gauge move, or is it kinda stuck at full tilt any time the key is on? If the latter, I would make sure the sending unit wire is not pinched or shorted to ground (which pegs the gauge full bore). A DMM can make quick work of it.

Good luck.
 
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 4, 2006
#6
  • Feb 4, 2006
  • #6
HISSIN50 said:
The parking light wire color on a GT is brown. It can be found under the dash if tracing wires. I would start at the headlight switch and ensure you have the parking-light output-signal from the switch.

Do all the bulbs work when your TS's are on and are they the correct wattage? Flashing fast can indicate too much juice passing through the flasher relay.

Does your OP gauge move, or is it kinda stuck at full tilt any time the key is on? If the latter, I would make sure the sending unit wire is not pinched or shorted to ground (which pegs the gauge full bore). A DMM can make quick work of it.

Good luck.
Click to expand...


if i unplug the op wire the gauge reads nothing it read good oil pressure before i changed the guage cluster and the parking lights do not come on at all in the front and the blinkers work really fast all the bulbs are right they worked before i changed the harness
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 4, 2006
#7
  • Feb 4, 2006
  • #7
The wiring scheme & some of the wire colors changed in 91. Since you didn't post your car year/mods in your sig, it will be much more difficult to troubleshoolt any problems you have.

No, it is not there for us to snoop and see any "Secrets" you have hidden away under the hood. Be a good stangnetter and update you sig for future reference & don't keep us guessing.

Mixing body harnesses between model years before 91 and after 91 can cause problems. Don't use a 91 body harness on a 89 car and expect not to have problems. It may work OK or it may not. The only way to know if it works OK is either to test it, or have both wiring diagrams side by side & compare them.
 
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 4, 2006
#8
  • Feb 4, 2006
  • #8
jrichker said:
The wiring scheme & some of the wire colors changed in 91. Since you didn't post your car year/mods in your sig, it will be much more difficult to troubleshoolt any problems you have.

No, it is not there for us to snoop and see any "Secrets" you have hidden away under the hood. Be a good stangnetter and update you sig for future reference & don't keep us guessing.

Mixing body harnesses between model years before 91 and after 91 can cause problems. Don't use a 91 body harness on a 89 car and expect not to have problems. It may work OK or it may not. The only way to know if it works OK is either to test it, or have both wiring diagrams side by side & compare them.
Click to expand...

sorry i am very computer illiterate it is a 93 with f3 harness's so everything should be fine but it's not the car is built bone stock as a 93 5.0 5 speed
 
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 4, 2006
#9
  • Feb 4, 2006
  • #9
fedup said:
sorry i am very computer illiterate it is a 93 with f3 harness's so everything should be fine but it's not the car is built bone stock as a 93 5.0 5 speed
Click to expand...


STILL NEED HELP ANYMORE ADVICE
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 4, 2006
#10
  • Feb 4, 2006
  • #10
AutoZone wiring diagrams

http://www.autozone.com/servlet/UiB..._us/0900823d/80/16/71/3c/0900823d8016713c.jsp for 79-88 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/19/59/5a/0900823d8019595a.jsp for 89-93 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-98 model Mustangs

See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/

Diagram courtesy of Tmoss & Stang&2birds


 
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 4, 2006
#11
  • Feb 4, 2006
  • #11
jrichker said:
AutoZone wiring diagrams

http://www.autozone.com/servlet/UiB..._us/0900823d/80/16/71/3c/0900823d8016713c.jsp for 79-88 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/19/59/5a/0900823d8019595a.jsp for 89-93 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-98 model Mustangs

See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring http://www.veryuseful.com/mustang/tech/engine/

Diagram courtesy of Tmoss & Stang&2birds


Click to expand...


now just an idea if im not using the headlight foglight switch and just still using the headlight only switch from the 4 cyl would that make a difference? cause im thinking that might be the problem i have the right switch when i find it in my garage caus it's a mess (10 car stable) with 2nd floor (all fords and parts)
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 4, 2006
#12
  • Feb 4, 2006
  • #12
fedup said:
now just an idea if im not using the headlight foglight switch and just still using the headlight only switch from the 4 cyl would that make a difference? cause im thinking that might be the problem i have the right switch when i find it in my garage caus it's a mess (10 car stable) with 2nd floor (all fords and parts)
Click to expand...
The diagram was posted for the wiring layout and colors. It helps a lot to see what it is supposed to look like when you start chasing things with an Ohmmeter. The switch would be the same between the 4 cylinder & V8 cars.
 
F

fedup

New Member
Aug 17, 2004
41
0
0
Feb 5, 2006
#13
  • Feb 5, 2006
  • #13
jrichker said:
The diagram was posted for the wiring layout and colors. It helps a lot to see what it is supposed to look like when you start chasing things with an Ohmmeter. The switch would be the same between the 4 cylinder & V8 cars.
Click to expand...
\
now the oil pressure problem i beleive this is it did the change the sending units in 90 or 91? if so would that be my problem as the motor was out of an 89
 
You must log in or register to reply here.

Similar threads

1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
485
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
597
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
849
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
486
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
193
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?