The thumbnail on the left is the airbag crash sensor that mounts on the center of the upper radiator support. The thumbnail on the right, is either the right of the left airbag crash sensor. It will have an R or an L stamped in the metal brackets somewhere, and yes they are R and L specific. They are held on buy the little green 8mm bolts.
The thumbnail on the left is the airbag crash sensor that mounts on the center of the upper radiator support. The thumbnail on the right, is either the right of the left airbag crash sensor. It will have an R or an L stamped in the metal brackets somewhere, and yes they are R and L specific. They are held on buy the little green 8mm bolts.
They're outta here. Thanks for the help. Sorry I didn't know for myself, but there isn't a single Mustang in the whole family. Just this truck my father-in-law owns.
And if you can appreciate (other than Mustang) cool automotive craftiness, here's what I do (hobby) on the side. About 12 in the last few years. We currently own 5.
I'm sure I'll have more questions soon. This sure has been a fun project so far! I've never done much of anything on a 5.0 motor, much less swapped one into a truck that started out I-6, 4-spd, carbed.