wiring headlight switch

The Dome light wire should first run to D1 on your headlight switch and then D2 should run to your courtesy lamp.

Headlight power is the main power for you headlights and headlight switch. It needs to connect to B

You brake lights work off a switch that's a pain to get to on your column. It gets activated when you depress the brake pedal. After looking at my notes, and the diagram for your year, it looks like headlight power goes to it through a circuit breaker in the headlight switch. So the brake stop switch wire from the harness goes to the Brake Stop Switch on the column. You need to add a wire from your headlight switch pin A to the other side of the Brake light switch. You must get this one right. You might check with your multi meter and make sure that I'm correct that the white Brake Switch wire give continuity with your brake light wires.

The Dash Ind Fuse is for you dash panel lights. The headlight switch provides power through it's dimmer circuit to the dash lights. It (pin I) needs to be connected to the ind pnl wire on the EZ harness. That wire should go through the fuse box and then to you instrument panel lights. The instrument panel lighting gave me fits. You will have to make the ground wires for each and every lamp. Draw you a schematic and then create that portion of the harness from quality wire.

Hope this helps. Good luck.