• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Wiring/Mechanich Frustration

  • Thread starter Thread starter FoxGT87
  • Start date Start date Jan 14, 2010
F

FoxGT87

5 Year Member
Aug 1, 2009
1,518
8
83
St.pete FL
Jan 14, 2010
#1
  • Jan 14, 2010
  • #1
so i brought my car into my mechanic for some simple gauge lighting fix. first thing happens is his helper try taking out the switch to the problem and wires go everywhere. "oh i will get to it, oh i will get to it" 3 weeks later frustrated that i dont have my car back yet, i begin to do some leg work for him and ask you guys for help. the members of stangnet help me get two wiring diagrams for me, for him. thank you. well everything gets plugged in, now your car wont start. i hound on him for another 4 weeks easily. just now started working on it again this last Saturday. he calls me monday afternoon, "your ECM is toast, and the PO wired up your MAF using the old speed density wiring harness just scabbed in the wires to make it work" IS THIS EVEN POSSIBLE? so i got him the ECM from autozone. but i guess the diablo sport chip used in the old ECM must be in the new one for the MAF to work because the wiring harness isnt correct. right now im frustrated and confused. i told him to try the new ECM with out the chip and see what happened maybe the chip is causing my throttle to return with lag, as i have checked censors, vacuum leaks, and physicaly made sure the throttle returned specifically. he told me the car wouldnt run with out the chip because of the wiring harness.

i am at the end of my short stick of patience, and im not really on here other than to betch a little bit

i like my mechanic he has been passed on to me from my dad. but im sick and tired of him treating my daily driver (thank god my fiance has a car) like its a fcking project car he can take his sweet ass time on FCK
 

MAC'n89Blckstng

Active Member
Jun 11, 2003
1,012
4
36
NJ
Jan 14, 2010
#2
  • Jan 14, 2010
  • #2
The MAF conversion uses the speed density wiring. Good luck with it. I doubt your computer is shot. It would take alot to burn one up!
 

nisreo

New Member
Jul 22, 2006
178
0
0
Jan 14, 2010
#3
  • Jan 14, 2010
  • #3
I'd get a new mechanic, take all your stuff back and get it towed to the new place.
 
F

FoxGT87

5 Year Member
Aug 1, 2009
1,518
8
83
St.pete FL
Jan 14, 2010
#4
  • Jan 14, 2010
  • #4
i forgot to mention that the PO had fcked up the sunroof draining hose... so water started dripping down the frame of the car and into the ECM. it wouldnt turn the car over but had the injectors pumping so the ECM was fried... but im still pissed its taking this long... very very pssed
 

MAC'n89Blckstng

Active Member
Jun 11, 2003
1,012
4
36
NJ
Jan 14, 2010
#5
  • Jan 14, 2010
  • #5
Wait, the car wouldn't turn over? The ecu doesn't control the starter. I don't know if thats what you meant.
 
You must log in or register to reply here.

Similar threads

7
WTB Looking for wiring harness parts 95 gt
  • 74delta
  • Jul 8, 2026
  • Want to Buy
Replies
2
Views
153
Want to Buy Jul 9, 2026
74delta
7
L
Electrical problems with passenger side downstream o2 sensor
  • Lexiii12
  • Sep 14, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
160
2005 - 2014 S-197 Mustang -General/Talk- Sep 14, 2026
Lexiii12
L
J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
246
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Friday at 3:09 PM
2000xp8
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
593
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?