Hi
My uncle owns a 2000 v6 mustang and he asked me to do wires and plugs and oil change today. Well I changed everything and when we went to start it wouldn't crank over. FYI the spark plugs looked like they haven't had been changed for years, gab was like above 70!!! Also wasn't idling normal. I double checked all my work and didn't find anything out of the normal. Spark plugs gab at .52 and wires are in order. I checked the coil for spark and found that only 3 wires had spark very lil at that.. So I went ahead and changed it, checked the fuel cut off switch also and it was fine. Tried again to start felt like it was then it died, Tried again and it just cranks and kinda wants to start but nothing.. I hooked up a Actron obd 2 scanner and it wont read a damn code..What am I missing here.. Plz help Im running out of ideas...
Tomorrow gonna charge battery because seemed a lil low and spray carb cleaner in tb...
My uncle owns a 2000 v6 mustang and he asked me to do wires and plugs and oil change today. Well I changed everything and when we went to start it wouldn't crank over. FYI the spark plugs looked like they haven't had been changed for years, gab was like above 70!!! Also wasn't idling normal. I double checked all my work and didn't find anything out of the normal. Spark plugs gab at .52 and wires are in order. I checked the coil for spark and found that only 3 wires had spark very lil at that.. So I went ahead and changed it, checked the fuel cut off switch also and it was fine. Tried again to start felt like it was then it died, Tried again and it just cranks and kinda wants to start but nothing.. I hooked up a Actron obd 2 scanner and it wont read a damn code..What am I missing here.. Plz help Im running out of ideas...
Tomorrow gonna charge battery because seemed a lil low and spray carb cleaner in tb...