• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Wow, my car takes a chitload of oil!!!

  • Thread starter Thread starter TheDamned
  • Start date Start date May 12, 2005
  • 1
  • 2
Next
1 of 2 Next Last

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 12, 2005
#1
  • May 12, 2005
  • #1
Gosh, I did my last oil change at 146 500 KM and now i'm at 149 500 KM and theres NO oil on the dipstick at all when i pull it.. Gosh, and I don't even drag race, whats up with that
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
May 12, 2005
#2
  • May 12, 2005
  • #2
thats no good

if i were you i would be really carefull and check oil every time u fill up gas and estimate how many miles per qt you use
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 12, 2005
#3
  • May 12, 2005
  • #3
urban96 said:
thats no good

if i were you i would be really carefull and check oil every time u fill up gas and estimate how many miles per qt you use
Click to expand...


Yep i'll start to check it out... Now I filled it up in oil... so i'll try to count that... My car is runnin very sluggish now and i have no idea why.. she's stored 8 months / year, only 80k miles... never saw any winter.. .and the the dude that had it before was an oldie... and my gas mileage is very bad and i get check engine very often... something's wrong for sure
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
May 12, 2005
#4
  • May 12, 2005
  • #4
have you pulled codes?
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 12, 2005
#5
  • May 12, 2005
  • #5
urban96 said:
have you pulled codes?
Click to expand...


nope, that's why i'm schedulin a rendez-vous at Ford's next week... But i'm scared it'll cost me a crapload of money
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 12, 2005
#6
  • May 12, 2005
  • #6
um, do you have a paperclip lying around? that is all you need. if you dont want to watch the CEL, Chris has posted links for a code reader that stores the codes for you - 32 bucks. that would get you about 5 mins at Ford.

good luck.
 

TheRedBlur

Active Member
Jul 7, 2003
15
0
38
seattle
May 12, 2005
#7
  • May 12, 2005
  • #7
do that oil flush crap before you change yer oil. and try going to a heavier weight, as motors age their clearances slack a bit and oil burns or slips through and leaks.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
May 13, 2005
#8
  • May 13, 2005
  • #8
i run 20w50 cause my car burns quite a bit, i'm nearing time for an oil change, and i've got more n it, than when i used 10w30.
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
May 13, 2005
#9
  • May 13, 2005
  • #9
With it being parked that much I would think the valve seals dried up and cracked? I know that is a mopar problem (older engines) is that also a 5.0 problem?

Chris
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 13, 2005
#10
  • May 13, 2005
  • #10
94-302-vert said:
With it being parked that much I would think the valve seals dried up and cracked? I know that is a mopar problem (older engines) is that also a 5.0 problem?

Chris
Click to expand...


No idea... never heard that.

i run 20w50 cause my car burns quite a bit, i'm nearing time for an oil change, and i've got more n it, than when i used 10w30.
Click to expand...

noted, ill get 20w50 next time... now ill keep an eye on the oil level.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
May 13, 2005
#11
  • May 13, 2005
  • #11
TheDamned said:
noted, ill get 20w50 next time... now ill keep an eye on the oil level.
Click to expand...


a guy that works at an oil changing place told me about that, he's on stangnet too. when i used 10w30 i would burn over a quart between changes (3000 miles) and i havent had to add any yet with this stuff, and i needa change my oil pretty soon.
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 13, 2005
#12
  • May 13, 2005
  • #12
matthiasj said:
a guy that works at an oil changing place told me about that, he's on stangnet too. when i used 10w30 i would burn over a quart between changes (3000 miles) and i havent had to add any yet with this stuff, and i needa change my oil pretty soon.
Click to expand...

synthetic or not ?

what brand ?
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
May 13, 2005
#13
  • May 13, 2005
  • #13
I use Coastal from autozone, cheap ****, but next time i'm going to use Castrol Syntech.
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
May 13, 2005
#14
  • May 13, 2005
  • #14
Running poorly, burning lots of oil...sounds like you need a rebuild man.
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 13, 2005
#15
  • May 13, 2005
  • #15
Swarzkopf said:
Running poorly, burning lots of oil...sounds like you need a rebuild man.
Click to expand...


Dude, I don't have the money for a rebuild and the car has never been beat to death, I'm sure it's something else, the motor is not done gosh only 80k miles for a 95.
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
May 13, 2005
#16
  • May 13, 2005
  • #16
*shrug*

If you aren't leaking profusely somewhere, your car is burning massive amounts of oil.

The fact that it is also running like **** suggest that you may in fact have a worn out engine.

Maybe someone along the line owned it and beat the hell out of it? Maybe someone didn't change the oil for 25K miles? Or ran it close to dry for too long?

Point is, your car is burning too much oil to just be the valves. How much smoke do you get from your exhaust?

Sorry for the advice.....?
 

Swarzkopf

Member
Sep 23, 2004
973
0
16
Pittsburgh
May 13, 2005
#17
  • May 13, 2005
  • #17
Just for comparison, my 5.0L has 85K miles on it. It's a 95 also. I spray a 125 shot of nitrous on it and beat the hell out of it in general. I'm not even down half a quart between oil changes, and my rear main seal leaks.
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
May 13, 2005
#18
  • May 13, 2005
  • #18
HISSIN50 said:
um, do you have a paperclip lying around? that is all you need. if you dont want to watch the CEL, Chris has posted links for a code reader that stores the codes for you - 32 bucks. that would get you about 5 mins at Ford.

good luck.
Click to expand...

Midway Auto Supply

Code Scanner: http://www.midwayautosupply.com/detailedproductdescription.asp?3829

Extension Cable: http://www.midwayautosupply.com/detailedproductdescription.asp?4077

Pull the codes and see what your car is telling you.
 

TheDamned

"I am Canadian and Damned for it!"
Jul 22, 2003
457
0
48
Montréal, Québec, Canada
May 13, 2005
#19
  • May 13, 2005
  • #19
Swarzkopf said:
*shrug*

If you aren't leaking profusely somewhere, your car is burning massive amounts of oil.

The fact that it is also running like **** suggest that you may in fact have a worn out engine.

Maybe someone along the line owned it and beat the hell out of it? Maybe someone didn't change the oil for 25K miles? Or ran it close to dry for too long?

Point is, your car is burning too much oil to just be the valves. How much smoke do you get from your exhaust?

Sorry for the advice.....?
Click to expand...


Well the previous owner was livin downtown montreal and didnt beat it, and before that it was an old dude.. i still have all the maintenance paper and everything was done right, and since I have it it's babified like crazy... And when I bought it (2 years ago) a Ford dude took my car for a spin after the tune up and said my car was runnin hella good...
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,373
140
113
Foothill Ranch, CA
May 13, 2005
#20
  • May 13, 2005
  • #20
Links above don't work, these do:

http://www.midwayautosupply.com/detailedproductdescription.asp?3829

http://www.midwayautosupply.com/detailedproductdescription.asp?4077
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
7
Views
303
SN95 V6 Mustang Tech Jul 24, 2026
gkomo
Big Posi and Neg wire from Starter to Battery and Alt wires..........
  • from6to8
  • Feb 9, 2026
  • 1994 - 1995 Specific Tech
Replies
1
Views
224
1994 - 1995 Specific Tech Feb 9, 2026
AeroCoupe
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
410
Fox 5.0 Mustang Tech May 11, 2026
keel
S
S302 Saleen supercharger help
  • sschoup
  • Nov 19, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
2
Views
346
2015 - 2023 (S550) Mustang -General/Talk Nov 19, 2025
sschoup
S
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?