• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Wrecked car HELP!!

  • Thread starter Thread starter P.HUNT
  • Start date Start date Mar 12, 2006
P

P.HUNT

New Member
Sep 21, 2005
15
0
0
SACRAMENTO CA
Mar 12, 2006
#1
  • Mar 12, 2006
  • #1
Ok so my friend wrecked his 1991 5.0 hit a pole.
it is a front end wreck and airbag was deployed.
I put in a new battery and everything works but it will not start, or even try to. I turn the key and absolutly nothing happens???
Is there something that needs to be reset??
I know about the inertia switch but that only controlls the fuel right?? It should still tyr to crank right??
Thanks Phil
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Mar 12, 2006
#2
  • Mar 12, 2006
  • #2
yes inertia or however you spell it need to be reset. Anychance some wires have come off the starter? perhaps the impact made the clutch neutral saftey switch fall off the relay. perhaps the impact destroyed the starter relay.
 

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
Mar 12, 2006
#3
  • Mar 12, 2006
  • #3
if "both" airbags came out i doubt its a 91 mustang...
 
P

P.HUNT

New Member
Sep 21, 2005
15
0
0
SACRAMENTO CA
Mar 12, 2006
#4
  • Mar 12, 2006
  • #4
sorry I only ment to say 1 airbag! it is a 1991
 
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Mar 12, 2006
#5
  • Mar 12, 2006
  • #5
in the hatch (i dunno in the notchback cars) there is a little rubber gromet on the drivers side...there is an inertia switch that may need reset. Its a little red button on top of it.
 
P

P.HUNT

New Member
Sep 21, 2005
15
0
0
SACRAMENTO CA
Mar 12, 2006
#6
  • Mar 12, 2006
  • #6
Yah it is a hatch back car but shouldnt the car at least crank over?
I am going to check it out again tomorrow it the weather is good.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Mar 13, 2006
#7
  • Mar 13, 2006
  • #7
The inertia switch only cuts power to the fuel pump. There are some other electrical issues going on. You can try to short the solenoid and eliminate the under dash wiring as a problem. If not check if the power is getting to the starter after that.
Kevin
 
You must log in or register to reply here.

Similar threads

S
92 5.0 almost starts
  • Steverino
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
278
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2026
General karthief
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
314
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
603
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
C
2000 Gt Really need some help
  • CocoD
  • Apr 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
354
1996 - 2004 SN95 Mustang -General/Talk- Aug 29, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?