• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

WTF is wrong with my Fuel Injector!!!

  • Thread starter Thread starter Venom351R
  • Start date Start date Apr 23, 2008

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 23, 2008
#1
  • Apr 23, 2008
  • #1
I took a short video so you can hear it your self, its hard to over the neighbors tractor but if you listen carefully you can hear the injector bulbing and gurgling. Ive replaced the top O ring and I just replaced the bottom O ring and I cant get it to stop spitting out fuel. Its gurgling around the base of the injector where it goes into the intake and seeping out from there. Its doing this with the engine turned off.

http://s29.photobucket.com/albums/c273/TravisMcEwen05/?action=view&current=001-6.flv
 

Bosko5.0

Active Member
May 18, 2006
1,067
0
37
longwood, FL
Apr 23, 2008
#2
  • Apr 23, 2008
  • #2
Try a different o ring. It relieving the pressure when off. make sure there is no debris on the oring and make sure that the injector ports are clean.

Also try using vasoline on the o ring when installing.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 23, 2008
#3
  • Apr 23, 2008
  • #3
Bosko5.0 said:
Try a different o ring. It relieving the pressure when off. make sure there is no debris on the oring and make sure that the injector ports are clean.

Also try using vasoline on the o ring when installing.
Click to expand...

I did all of that they are new O rings on both ends and its stil seeping fuel. I just took out out for a spin after cleaning out the injector port and it wont stop seeping fuel out around the base of the injector where it goes into the intake. It takes a lot to notice it but you can hear it bubbling out. Im f'ing sick of this problem its been doing this for more then 2 wks now and no matter what I do it wont stop sptting out fuel. I may just call it a defeat and wait until the new injectors and intake to go on

I wanted to go to the track tonight but I know its not a good idea with it like this no matter how minor the leak.
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Apr 23, 2008
#4
  • Apr 23, 2008
  • #4
Redline_351R said:
I did all of that they are new O rings on both ends and its stil seeping fuel. I just took out out for a spin after cleaning out the injector port and it wont stop seeping fuel out around the base of the injector where it goes into the intake. It takes a lot to notice it but you can hear it bubbling out. Im f'ing sick of this problem its been doing this for more then 2 wks now and no matter what I do it wont stop sptting out fuel. I may just call it a defeat and wait until the new injectors and intake to go on

I wanted to go to the track tonight but I know its not a good idea with it like this no matter how minor the leak.
Click to expand...

Can you take pics? You've been beating the bag out of those 24 pounders, they will break! I'd take it easy, fuel and spark should only meet inside the combustion chamber!!

Adam
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 23, 2008
#5
  • Apr 23, 2008
  • #5
Black95GTS said:
Can you take pics? You've been beating the bag out of those 24 pounders, they will break! I'd take it easy, fuel and spark should only meet inside the combustion chamber!!

Adam
Click to expand...

I'm not driving it and I don't plan to until it goes to the shop for the Cam/Intake install. What is it that you want a picture of? You can see it seeping out but with pictures you wont be able to tell, its only something you an hear and see with your own eyes.
 

Bosko5.0

Active Member
May 18, 2006
1,067
0
37
longwood, FL
Apr 23, 2008
#6
  • Apr 23, 2008
  • #6
did you try bigger orings?
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 23, 2008
#7
  • Apr 23, 2008
  • #7
Bosko5.0 said:
did you try bigger orings?
Click to expand...

The O rings I put on it were the same size that came off it, it was run quite a lot last summer with no issues such as this, its only started up since I took it out this spring.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Apr 23, 2008
#8
  • Apr 23, 2008
  • #8
you try swapping two of the injectors around? thatll tell you if its just that injector or if its the rail/intake port
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 24, 2008
#9
  • Apr 24, 2008
  • #9
urban96 said:
you try swapping two of the injectors around? thatll tell you if its just that injector or if its the rail/intake port
Click to expand...

I'll try that and see what I come up with.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 24, 2008
#10
  • Apr 24, 2008
  • #10
urban96 said:
you try swapping two of the injectors around? that ll tell you if its just that injector or if its the rail/intake port
Click to expand...

I tried this, I swapped out the injector that as leaking (forward most injector on the drivers side) with the one right behind it. Took it out for a spin same distance that I always took it when testing it out before, got on it just about as hard. Came back popped the hood and no issues at all. The injector that was seeping that is now swapped to the port behind it is no longer leaking and the injector in port #1 is not seeping either. Maybe the problem injector just did not want to seat the way it should have in that injector port. Very odd but its not leaking fuel at this point in time so hopefully its fixed for good
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Apr 24, 2008
#11
  • Apr 24, 2008
  • #11
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Apr 24, 2008
#12
  • Apr 24, 2008
  • #12
How did you first find out it was leaking?
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 24, 2008
#13
  • Apr 24, 2008
  • #13
mustang6tee8 said:
How did you first find out it was leaking?
Click to expand...

I could smell it from inside the car and when I looked under the hood the front of the intake was wet with fuel and it was all puddled up on the top of the intake by the first two injectors. It was actually quite a bit of fuel sitting there I'm lucky that nothing went up in flames.
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Apr 24, 2008
#14
  • Apr 24, 2008
  • #14
I've been smelling fuel while driving too, I'll have to check it out.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 24, 2008
#15
  • Apr 24, 2008
  • #15
mustang6tee8 said:
I've been smelling fuel while driving too, I'll have to check it out.
Click to expand...

Its nothing to unbolt the upper intake and raise it up some to see whats going on with the injectors, its harder on the passangers side b/c of all the crap in the way, I was lucky that it was on my drivers side.
 

mustang6tee8

Member
Jul 19, 2005
375
0
17
College Station, TX
Apr 24, 2008
#16
  • Apr 24, 2008
  • #16
I didn't see any fuel after running the car. Though, I can't smell the gas all the time..
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
Apr 25, 2008
#17
  • Apr 25, 2008
  • #17
mustang6tee8 said:
I didn't see any fuel after running the car. Though, I can't smell the gas all the time..
Click to expand...

It could be coming from another location. Are you sure its not an exhaust leak that you smell?
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Apr 25, 2008
#18
  • Apr 25, 2008
  • #18
mustang6tee8 said:
I didn't see any fuel after running the car. Though, I can't smell the gas all the time..
Click to expand...
rear up/search about our charcoal canister
 
You must log in or register to reply here.

Similar threads

98 GT PI Swapped Engine Fires, Dies Immediately NOT PATS
  • MMccPerformance
  • Dec 2, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
My First Mustang
  • Michael H.
  • Oct 27, 2017
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 30, 2017
Michael H.
Fuel Swapping Injectors
  • mikestang63
  • Nov 4, 2012
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Nov 5, 2012
jrichker
D
  • Locked
Expired 302 Powered 1977 Datsun 280z
  • Devius2006
  • Oct 28, 2012
  • Other Classifieds
Replies
0
Views
4K
Other Classifieds Oct 28, 2012
Devius2006
D
S
How much vacuum
  • SSStang
  • Nov 23, 2011
  • Fox 5.0 Mustang Tech
Replies
6
Views
635
Fox 5.0 Mustang Tech Nov 26, 2011
SSStang
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?