WTF My Damn Seat Broke

This is what my pass seat was like when I bought my car. after taking off the trim I could cearly see the mechanism was shot. Others have ahd bolts fall out. I ended up going to a semi-local junk-yard (or automotive recycling center if you prefer) and bought another seat out of a 95 v6 car. The mechanism is easily swapped. I did it in about 15 minutes with both seats already on the bench. But you could do it with the seat still in the car. Cost me $35. the same part at the dealer is right around $100 i think.

What you have to do is remove all of the trim from the seat, then unhool and pull the fabric up on the top part of teh seat to get to the bolts for it. there are 4 bolts holding it onto the seat frame. not too bad to R&R.

Good luck.