what sensor is this?

l3lue

New Member
Jun 21, 2004
32
0
0
Hey guys,

there is a sensor towards the front of my engine that looks like it should have two vacuum hoses connected to it. it's blue and has the part number E32E-9B982-AIA on it..it looks kinda like a T and two vacuum lines should be ran to it...i found it odd because it was just unplugged and with the key on the "on" position it was hot?..any ideas?..
 
Charcoal canister plumbing - one 3/8" tube from the bottom of the upper manifold to the rubber hose. Rubber hose connects to one side of the canister solenoid valve. Other side of the solenoid valve connects to one side of the canister. The other side of the canister connects to a rubber hose that connects to a line that goes all the way back to the gas tank. There is an electrical connector coming from the passenger side injector harness near #1 injector that plugs into the canister solenoid valve. It's purpose is to vent the gas tank. The solenoid valve opens at cruse to provide some extra fuel.

It does not weigh but a pound or so and helps richen up the cruse mixture. It draws no HP & keeps the car from smelling like gasoline in a closed garage. So with all these good things and no bad ones, why not hook it up & use it?
 
i had no idea that the charcoal box had a sensor that was blu but jrichker and HISSIN50 know way more than i ever will.
i'm trying to learn all i can so and when you get a chance could post a pic of that blu sensor on the charcoal box ?
 
i had no idea that the charcoal box had a sensor that was blu but jrichker and HISSIN50 know way more than i ever will.
i'm trying to learn all i can so and when you get a chance could post a pic of that blu sensor on the charcoal box ?

It's actually a solenoid, not a sensor.

I dont have a pic of a fox solenoid but here's one for a 94-95 (courtesy of Punisher302)

whatisthis.webp