i have a 408w- hydraulic .523 .523cam, steel crank and heads (windsor sr.), forged rods and pistons.
what do yall think of this- should i run #10 from cell to pump, #8 from pump to regulator, #8from regulator to carb? i do plan on spraying down the road. i was told by a local mustang shop i might wanna run #10 from the cell to the pump to keep fuel supplied to the pump. is this necesary?
this kit seems like a pretty good deal. comments...
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RUS-641520&N=700+0&autoview=sku
carb recommendations? car is not a dd but im trying to keep it as street friendly as possible because 80% of driving is on street. barry grant seems expensive, is it worth it? iwas trying to stick to holley. also, i'll be running a dual plane intake.
thanks for the help
what do yall think of this- should i run #10 from cell to pump, #8 from pump to regulator, #8from regulator to carb? i do plan on spraying down the road. i was told by a local mustang shop i might wanna run #10 from the cell to the pump to keep fuel supplied to the pump. is this necesary?
this kit seems like a pretty good deal. comments...
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RUS-641520&N=700+0&autoview=sku
carb recommendations? car is not a dd but im trying to keep it as street friendly as possible because 80% of driving is on street. barry grant seems expensive, is it worth it? iwas trying to stick to holley. also, i'll be running a dual plane intake.
thanks for the help