Cleaning Up Under The Hood

[OneSlw5point0]

I'd like to start cleaning up my engine bay. I drive the stallion everyday, so im not sure what would be safe to delete.

See anything I could get rid of?

 

[5.0W/5.0]

1st of all, get rid of that intake!!!! PM me for a shipping address...I will dispose of it for you!

 

[speedtrip]

You can hide the starter solenoid/wiring in fender. Get a anderson power pipe and put the big honking air filter in the fender. Battery in trunk or what im gonna do get mini race battery. You can ditch the ac and all smog crap. I also hid the main harness down low behind engine and under booster.

 

[50foxbody]

one of the few with the coil cover niceeeeeee looks clean without hiding anything but just my opinion.

 

[Mustang5L5]

Well, everything has a purpose, so deleting stuff may have consequences. So choose carefully what you remove

 

[OneSlw5point0]

1st of all, get rid of that intake!!!! PM me for a shipping address...I will dispose of it for you!

Sorry bud, im quite partial to my intake.

 

[Tanus]

its actually pretty clean as is, maybe get some black wire loom to cover some of the misc wires you got. Or get crazy and pull the motor and go all out

 

[88GTBlack]

Delete the a/c pull radiator brackets spray em black again spray radiator black delete the a/c did i say delete the a/c? Oh yeah +1 in the intake man you gotta do something about that filter

 

[StreetDreamsGT]

If you look there should be an old thread about cleaning up the engine bay, I know because I was considering doing the same thing a while back. You could actually hide a majority of the wires in the fenders if you're going to put the starter solenoid and maf air in the fender too.

 

[OneSlw5point0]

Delete the a/c pull radiator brackets spray em black again spray radiator black delete the a/c did i say delete the a/c? Oh yeah +1 in the intake man you gotta do something about that filter

Whatd you say about the A/C?

Lol, looks like im gonna be sweatin my ass off this summer, getting some black spray and some wire looom.


Thanks for the ideas.


& ill have to search for that old thread too.