Search results

  1. M

    CHECK THIS II OUT

    Saw this one in a salvage yard a few years ago and was finally able to get my hands on it last week. Someone sure put a lot of work into it. I've taken off the fender to repair some dents. This thing has two radiators, one in the factory spot and the other allong the frame...
  2. M

    2031 with 1.6 Rollers

    awhile back I saw a 2031 powermax for sale locally that I couldn't pass up. I paid 50 bucks for the cam and spring kit still in the wrapping. I was working on a 1988 mustang project with recently rebuilt Home ported E7s, keith black hyp. pistons, typhoon intake, 19 lbs inj.,and a 65 MM tb. Not...
  3. M

    The AOD fits !!!

    Finally mached up a 5.0 with AOD today. And actually fit better than I thought it would. Looks great. I did have to cut open the top of the tranny tunnel right at the bell housing bolts. The opening I cut just clears the bottom of the plenum. Factory exhaust manifolds work but are a little...
  4. M

    yet another cam question

    I,ve been searching the threads for awhile now and have yet to find a exact answer. I have a NON ho 302 with the E6se heads. First off I tossed out the heads, pistons, and 14 lb injectors. What i,ve got now is Ported and decked e7s, 65mm tb & EGR plate, typoon intake, 19 lb injectors, KB...
  5. M

    the breaking point

    What is the max HP a stock 302 can maintain? Like say I have a stock 302 block that has several bolt on upgrades, how far can I go until upgrading the block becomes an issue? Same question goes goes for the AOD guys out there. How much power and torque can a stock AOD take with a 1900 to 2300...
  6. M

    Power steering options??

    I'm planning on buying a new or referbed power steering rack for my 77 MII and was wondering if anyone had retro-fitted a newer P/S pump. I'm doing a complete engine transplant from a 87 5.0 and it would be nice to keep things simple on the accessory drive. Can it be done? Is there a difference...
  7. M

    Whats the difference??

    The E7TE-AA vs the E7TE-PA..Are they basically the same head ? Will they interchange? :shrug: One more question..Has anyone here had any valve clearance problems with stock pistons when using a b-303 or e-303 cam? What are some good pistons to use?
  8. M

    E7 woes

    I'm trying to make a 5.0 HO out of a 1987 5.0 that has the "high swirl" heads, which suc. So my question is: Are they any other heads out there,besides aftermarket, that will compete with the E7? I have a pair of E5CA's and what I believe are E8 truck heads, Will any of these work well a...
  9. M

    anyone here done a EFI 5.0 with AOD swap to a mstng II

    Just trying to gather some intel on what might be involved in this swap. I have a 87 EFI 5.0 and aod tranny already to go into a 77 2+2 t-top that had an old beat up 302 with a 4 speed in it. I need some good advice on this project so who better to ask than you guys.
Top Bottom
Back
Forums
Menu