Search results

  1. Green Machine

    Paint and Body Converting Base Gt To Perf Pack Front Splitter

    Has anyone upgraded there base 2015-2016 Mustang GT to the performance pack front wind splitter? I' m not clear if the part is integrated into the lower bumper or it's bolted on. I've called a local Ford Dealer and they're not sure either. Any information will be appreciated! Thanks, Dewman
  2. Green Machine

    Cold Air Intakes - Any Hp Gains?

    I'm researching CAI's and it looks like AiRaid makes a solid one for our 2016 Mustang GT's Have any up you installed one and if so do you have any before and after dyno numbers? I'm trying to stay away from doing the SCT tuner for awhile to make sure the motor is good. Don't want to void the...
  3. Green Machine

    Ford Racing Exhaust Options?

    I'm enjoying my base 2016 Mustang GT with the resonantor delete and stock muffler. Love the X-pipe exhaust note, but I would like it louder. I understand Borla makes the Ford Racing Sport and Touring mufflers. I've been looking at the Roush Axel backs, but I think that may be too loud. So, would...
  4. Green Machine

    Progress Thread New Parts

    On my 2016 base GT - Added the GT strut tower brace and the Boss 302 coil covers. Easy install...
  5. Green Machine

    Back To It...

    Just purchased a deep impact blue GT and love it. Talk about some upgrades from my old 2005 4.6 GT, wow! Starting out with the Ford X-pipe delete kit and keeping the stock mufflers on my 2016. I'm going to stay with the warranty for awhile rather than doing a Bama tune. Just read that Ford...
  6. Green Machine

    Trading Car in need advice

    Looks like I'm going to be able to purchase a 2008 Shelby GT500 in the next 3months :jaw: . I'll need to get the most $$ out of my 2005 Mustang GT to do it. One of the big dealer ships has 3 Shelbys coups at 45K to 47K, and with cash I can negoiate it down. Btw - just turn 20K miles on the...
  7. Green Machine

    Shelby GT500 Twin 65mm tb kit

    Has anyone installed this kit from RPM outlet (FMS-M- 6659-GT5) yet on there 2005 Mustang GT? Sadly, it looks like they're the only one out there selling a bolt on kit. Thanks, Dewman
  8. Green Machine

    Dyno time at VMP with BamaChip Doug

    Doug was in town and I had him tune my Mustang. Best part he increased my gas mileage from 25 mpg at 70 mph to 26.3mpg at 70mph. :nice: :nice: The final SAE corrected numbers were 298.02 and 314.99 torque, not bad for 20" rims and tires. See my sig for the bolt on list. I have the...
  9. Green Machine

    JBA equal length shortys test drive

    These headers are nice (JBA part #1675S). They were a chore to install, but well worth it. I had a friend install them, and it was slow going to get them in. Now the test drive. I took a drive on I-4 and the air temp was about 85*. I kept the speedo at 68mph in 5th gear with cruise on. Ended...
  10. Green Machine

    Fitch Fuel Catalyst

    I saw this tested on HorsePower TV this past Sat. On the dyno they did a before and after runs. It added 2-3 hp & torque on the carb'd Chevy motor they tested on. Also increased the gas mileage. Also saw the article in the Sept. 5.0 Mustang & SFords. I did some searching and found some...
  11. Green Machine

    Strut Tower Bars - Are they worth it?

    I had one on my 94 GT, but I also had full subframe connectors,UCA's, LCA's,lowering springs, and k-frame bar. So the sum of the whole made for great handling. On S197's I'm wondering if it's the same thing. Let's here some opinions if they are worth it. My over all goal is to have parts...
  12. Green Machine

    Ford K springs and 20" Bullitts

    I have 20 x 8.5 American Muscle DD bullitt rims with Nitto 555 - 255x30x20 . I'm thinking about getting some of the Ford 'K' springs for my 05 Mustang GT. Will there be any clearence issues? I believe the advertised drop is 1.5" all way around, and I wondered if that was true. Thanks in...
  13. Green Machine

    Ford Racing Sill Plates - Don't do it

    I bought a used pair of the Ford Racing alum sill plates (Ford Racing decal) from my mechanic for $20 cheap. They had just one strip of double faced tape down the middle. However they stuck well till about a week ago. I noticed that drivers side had bad wear marks from where the door was now...
  14. Green Machine

    New Bullitt Rims

    Ordered Monday of this week and they came yesterday afternoon. :D Ordered from American Muscle - Anthracite 20x8.5 deep dish with Nitto 555 255x35x20's, Mounted & balanced. Had them direct shipped to my Goodyear store where they mounted them up and checked the alignment. No alignment was...
  15. Green Machine

    CMCV & Bama 93 Race Tune - WOW

    Ok, no dyno results yet, but what a differece the CMCV delete makes. Had a friend install them in about 1 hr including a 15min cool down period. Then a couple more minutes to upload Doug's new 93 race tune. There is good increase in torque in the low in and mid range and drops off a little...
  16. Green Machine

    Running A/C more hp?

    Yea, strange as it sounds when I turn the A/C on I can see and feel a noticeable difference in hp on my 05 with a Doug 93 Race Bama tune. It's like having another 10 hp on tap. I lauch quicker and the front end raises up more compare to same scenario without the A/C running. I have...
  17. Green Machine

    20 x 8.5 Bullit Rim questions

    Looking at going with 20x8.5" Bullit rims. The tires will be mounted and balanced then shipped. All I need to do is get the front end aligned once there on. Need to know about the following: How's the ride quality with 255x35x20 Nitto's 555 extreme's? How about Castner Camber plates...
  18. Green Machine

    TSW Volcano Rims - Can you do 19x9.5 all way round?

    Saw ViperBrads 2005 LL GT in the gallery with some great looking TSW Volcano rims (see link below). I'm thinking he has the 19x8 in front with 19x9.5 in the rear. They really look good. However, I like the 3" lip on the rear, and I wonder would the 19x9.5 work up front? I think 275x35x19's...
  19. Green Machine

    Bamchips 93 Race Tune

    WOW!!!:hail2: Just upgraded from a AFE Stage 2 cai with Doug's 93 performance tune to a JLT II and his 93 Race tune. Big difference even with high humidity and Fla. sun. The throttle is immediate, exhaust is deeper and hit second and it pulls like a freight train. :nice: Way to go...
  20. Green Machine

    Link to Mustang Site Simulator

    I've searched but can't find the link to the web site that allows you to change our S197 Mustang body color - rim styles - front and rear spoliers etc. Can someone post it? Thanks Dewman:nice:
Top Bottom
Back
Forums
Menu