Search results

  1. brianj5600

    351w Efi Intake In A 67-68

    Anyone know what will fit under a stock hood? I don't want to rev it much over 6000 rpm. I am looking at a RPM2 or trick flow.
  2. brianj5600

    Where to put all these gauges?

    I have too many and want ideas where others are mounting them. Pictures would be great. I have boost, A/F, trans temp and oil temp to find a home for. Any year pics would be great, 67-68 especially.
  3. brianj5600

    1967 Mustang Coupe 351w Single Turbo Build

    I started a few years ago. I have had 2 kids since the project started, which does nothing to speed things along. The car was originally a 6 cylinder and bone stock. I have redone the suspension, brakes, engine, transmission, fuel system, and rear end. All was done in my garage except the...
  4. brianj5600

    ET gain with skinnies?

    I am curious if anyone has any experience with swapping to lighter/smaller wheel/tire combos. The wheels and tires on my car now weigh 46 lbs each. I am curious how much I am giving up ET wise vs skinnies. I will report back to back results on 11/4.
  5. brianj5600

    Master cut off in backup light

    I took a look at it today and don't see how it fits w/o cutting the brace from the inner quarter to the frame rail. I would rather not cut it if I don't have to. I thought it would be a simple job. For those who have done it. What did you do to fit it?
  6. brianj5600

    Built in residual valves

    I am looking for a 15/16" master cylinder for 4 wheel disc. Do all drum brake MC have residual valves built in? If so how do you defeat them.
  7. brianj5600

    95 rear brakes

    What soft line at the caliper should I use? The stock 95 line is right under the bump stop. Any ideas?
  8. brianj5600

    Toploader and hydrualic clutch

    I am seriously thinking of swapping from a C4 to a toploader. What are the chances of using on of these? http://www.wilwood.com/Products/005-PedalAssemblies/002-FSMP/clutch/index.asp I have a welder and I am not afraid to use it! I'm not worried about concourse either. I have seen kits, but...
  9. brianj5600

    68 column with 67 brake pedal

    I attached a pic of mine. I need to know if I need a different one to clear a collapsable column.
  10. brianj5600

    Flat cam lobe

    I think I ate a cam lobe. I only ran it 25 minutes and it has a noise I can't identify. I cut open the filter and there was not much if anything in it. The oil that poured out of it was metalic looking though. Can anyone tell me of their experience with a flat lobe.
  11. brianj5600

    Oh the humanity!

    http://img.photobucket.com/albums/v...ch/46317629.jpg
  12. brianj5600

    Bypass hose size?

    I have a 351w and need a thermostat bypass hose. My local auto parts store have the guys that were recently flipping burgers, and can't find anything in the system but a 3/4" bypass, and it took four people to find that. Both my wp and thermostat housing are 5/8". Anyone know what year a 351...
  13. brianj5600

    Underhood heat management?

    Has anyone done anything or seen anything that helps extract hot air from under the hood? Pics would be great!
  14. brianj5600

    Shelby side scoops?

    In a recent magazine there is a 69 coupe with them. I want them on my 67 coupe, but I'm not wild about the ones that came on those cars. Are there any 65 style rear brake scoops that fit the quarter of a 67?
  15. brianj5600

    Motor mounts 69s in a 67

    I have a 67 w a 351w. I am wondering if I can use 69 w or c upper motor mounts with my 67 frame mounts. The object is to lower the engine. Now I have the earlier 289/302 mounts and want more hood clearance. It looks like it lowers the engine .75 to 1 inch. Are the frame mounts spaced the...
  16. brianj5600

    Frame connectors

    Anyone build their own. Got pics? Most are square tubing, but I thought round was stronger. I'm thinking of round tube through the floor, slightly anyway. How do your's tie to the stock rails?
  17. brianj5600

    68 Shelby valance

    http://www.mustang-50.com/itemdy01.asp?T1=QF19041+01&Category=&catkey=EMUSTANG Does anyone know if this will work on a 67 coupe with stock bumper and brackets? Or what it would take?
  18. brianj5600

    Big tires

    I keep seeing early Mustangs in magazines with very big tires on the back. I am not talking pro street, but pro touring. Is anyone on this site running big radials on back, or have links to web sites that show build ups?
  19. brianj5600

    Strut suspension

    Has anyone ever seriously thought about making their own strut suspension? I was looking at a mag that has the Aussie strut kit in it. It looks pretty simple, but it always does when someone else does it. A rear steer strut set up would help with some of the hurdles of a R&P too. The $3000...
  20. brianj5600

    gas tank pick up

    I'm planning on making a good bit of hp so I am worried about the stock pick up in the tank. Has anyone ever modded the pick up w/o messing with the outside of the tank? Or know of websites that have info on it?
Top Bottom
Back
Forums
Menu