Search results

  1. B

    ECU Ground

    Where does the Ecu ground in a 94-95 mustang gt. My LC1 is reading wierd, so I want to ground it to the same ground as the ecu. It says in the manual to do this if you are logging through the ecu, so each ground isn't difference for accurate results. I will be logging afr through the egr...
  2. B

    Problems after first drive, possible intake leak

    Had the car up and running, it would idle somewhat decent for not much of a tune. Drove it up the road, had power through all the rpms. Was running somewhat decent. On the way back to the house, it started making a sound like an exhaust leak, but its not a ticking noise, more like a whoosh...
  3. B

    Started my car!! Have a few problems.

    After a few setbacks, I finally got to start my new engine. I have a couple of questions though. While the car is running a buzzing sound will come and go. Sounds like it is the ccrm. I have heard of them buzzing but usually it is a constant buzz and its because of a bad ground. I will be...
  4. B

    Radiator Overflow Catch can

    Ive read that I have to have a can that has the inlet on the bottom and the drain on the top so that it can suck the coolant back into the radiator. Can I use this one if I turn it upside down with the drain on top. Summit SUM-G1473 - Summit® Radiator Catch Cans with Sight Tube - Overview -...
  5. B

    94 gt line lock help!!! w/pics

    Ive searched and searched but havent found a line lock tutorial for my car. It has abs, but the abs light is on and abs doesnt work, so im not sure if that will affect the line lock. In the first pic, i guess the proportional valve, has 2 lines coming from it which run to the abs unit in the...
  6. B

    Broken Bolt!!! and other problems

    1. Went to put my heads on my shortblock and one of the shorter bolts is broken off in the block. I thought i checked all the bolts before i took it to the machine shop but i guess missed one. What can i do?. Do i just drill it out and tap it. Thankfully my head is a 1/2inch bolt head and i...
  7. B

    Few questions about my build

    Ok I am about to start working on my build. I have a few questions. 1. What cam thrust plate am I supposed to use. It is going in a 94 mustang, but the block i am using is a late 80s roller block. I cant take mine off my motor because its still in the car so i am just going to order a new...
  8. B

    Need some opinions

    Ok got me some new track numbers. I ran a 13.84 @ 98.8. 60 ft was 2.09 and my 1/8 mile was 8.82. My 1/8 mile was better then a ls1 camaro and then they run a 13.5 and i ran the 13.8. My mods are, slightly ported heads and intake, march u/d, bbk long tubes and xpipe, flows, cold air and a...
  9. B

    Fox body Rear Springs

    Does anyone know if the rear springs for the fox body is the same as our cars. I Found a set of springs i want for the rear to go with my front drag launch kit springs, but it says they are for a fox, does anyone know if they are the same? Thx
  10. B

    Longtubes are in. :)

    Well figured i would tell everyone i got my bbk long tube headers installed. Now all im doin is waitin on my transmission to be rebuilt. For all those people who doubt long tube headers just becuase of the install. Dont. Its not as bad to install the headers as everyone makes you think...
  11. B

    A/c delete.

    Ok, ive searched a few times but cant find the answers im looking for. Ok this weekend i am goin to delete my a/c. I have a upr smog pump delete bracket, and i will also be puttin on a oriellys idler pulley, which is a tad bit smaller then the stock pulley. Dont kno why but it is a bit...
  12. B

    Oil Pressure problem

    Ok, I just rebuilt the top end of my car. PnP heads and intake. Reason I really took it apart cause i got a great deal on the pnp heads and intake and i had a horrible miss and thought it was the valves. Turned out i broke a valve lock and was about to drop a valve. so i guess it was good i...
  13. B

    Autometer Tach

    I just bought a autometer tach and shiftlite, I got a very good deal on it so i couldnt pass it up, only bad thing is, its a silver gauge and everything and i was wanting black. So i was wondering if u can change the silver inside to black. I was gonna do this and then paint the outside...
  14. B

    few questions

    1. Just rebuilt the top end of my car, and now when i can give it gas, and let off and it feels like the car pulls itself, like its still givin it gas. and when i give it gas then push the clutch in, it revs itself up. Not like usual, it revs up 500-1000 rpms. 2. The airbag cover on...
  15. B

    yet another question

    Ok ive came across some port and polished e7 heads, been milled and have a 3 angle valve job, .600 lift springs, 63 cc chambers i think. The car they are comin off of ran a 12.6 @ 106 wit f cam. Just wonder wat kinda power id be makin wit them heads f cam and my stock intake ported by tmoss...
  16. B

    Problem. Sorta sounds like backfiring.

    When i first start my car, and start to drive up the road. I will start to feel the car lose power. and then it will make a sound, sounds like backfiring, but sounds like its coming from the engine bay, wat could this be.
  17. B

    93 cobra intake

    Just bought a 93 cobra intake, and im wonderin whats my options for an intake elbow. I know trick flow makes one, and ive seen a few other before but cant seem to find none of them now. Would appreciate some links to some other ones. Also is there anything else ill have to do to put the...
  18. B

    Another will these tires fit question

    Im lookin to get some nitto drag radials. I have 2000 mustang gt wheels on my car i think they are 17X8. Just wonderin if i can get some 275s on there, right now it has 255, 40s. so what 275 should i get.
  19. B

    ive got a question , header install

    Which one of these gaskets should i get. http://store.summitracing.com/partdetail.asp?part=MRG%2D7160&N=700+4294908331+4294908282+4294840126+115&autoview=sku http://store.summitracing.com/partdetail.asp?part=MRG%2D7161&N=700+4294921566+4294908331+4294908248+115&autoview=sku Dont know if i...
  20. B

    Installing clutch, any tips????

    Clutch is slipping something horrible in my 94 gt. So im bout to install a ford racing king cobra clutch, steeda firewall adjuster, and steeda quadrant. Any tips for the install? Any precautions? :SNSign:
Top Bottom
Back
Forums
Menu