Search results

  1. 1993whtstang

    Expired stock cam off 1993 mustang gt

    I have a stock cam off a 93 gt in excellent shape , car only had 69,000 miles on it when taken out. Make offer! plus you pay shipping.
  2. 1993whtstang

    Expired stock cam off 1992 mustang gt

    I have a stock cam off a 93 gt in excellent shape , car only had 69,000 miles on it when taken out. Make offer! plus you pay shipping.
  3. 1993whtstang

    Expired stock mass air flow meter of 1993 gt

    excellent condition MAF of a 1993 mustang gt, car only had 69,000 miles when removed. Make offer!
  4. 1993whtstang

    SOLD 1993 Mustang Gt Hatchback, 72,000 miles, lots of mods

    1993 White Mustang GT Hatchback with only 72,000 original miles, and has the rare black interior in excellent shape. Only interior flaw is a small hole in the drivers seat. This car was a florida car and has the original paint in excellent condition. There is no rot anywhere on this car. I have...
  5. 1993whtstang

    Engine Oil To Use On An Engine Rebuild??

    I was wondering if I should be using a certain type of oil on a head,cam, intake rebuild?? I had a trickflow H/C/I kit installed and put new ford lifters in also. The car is a 1993 GT. 5.0. I put royal purple 10W-30 synthetic oil in it. Is there a different oil I should be using instead with...
  6. 1993whtstang

    Expired Bran New Bbk Fuel Rail Kit In The Box, Unopened!

    I am selling a brand new BBK fuel rail kit in the box, unopened, never used. Fits 1986- 1993 Mustangs , 5.0 L and 4.6 L. Here is the spec from BBK...
  7. 1993whtstang

    Engine Bypassing Coolant Lines From Egr Block On Accufab Throttle Body

    I have a new 75 mm accufab throttle body for mt 1993 mustang gt, I put this on with a trickflow H/C/I kit. The problem I am having is coolant got sucked into the intake becuase the gasket does not seem to seal well. Ive replaced the gasket twice. I called accufab and they recomend to bypass the...
  8. 1993whtstang

    Anyone Know Where To Buy A Good Remanufactured Ecu Computer From??

    Who would carry a good remanufactured ECU computer for a 1993 mustang gt 5.0 manual . My dyno guy said the bolt that holds the harness on inside the computer is broke and suggested replacing the ECU so he can get goood readings on my sensors. Its not making a good contact with the bolt broken...
  9. 1993whtstang

    Part Numbers For Barometric Sensor?? Did Ford Change Number?

    Hi I pulled a code 22 and did all the tests and determined it was a bad barometric sensor. I ordered an original motorcraft part # E7Ef-12A644-A2A from ford that I picked up today. The part they gave me was a E7FZ-12A644-A. The guy said this is the new cross reference part number from ford...
  10. 1993whtstang

    Expired Canton Polished Aluminum Coolant Bottle

    I just put in a new mischimoto dual fan radiator and radiator shround kit in my 1993 mustang gt. I bought a Canton polished aluminum aftermarket coolant reservor, it doesnt fit with my new radiator with electric fan setup It would work with a stock radiator for sure and prob some aftermarket...
  11. 1993whtstang

    Will Trickflow Spacer Work With Trickflow Intake With A Stock Hood On 1993 Gt

    Question? Will the 3/8" trickflow spacer work with the track heat upper intake on a 1993 mustang gt with a stock hood? I did a trickflow H/C/I with BBK fuel rails. My mechanic said when he put the intake on it was really tight against the fuel rails and made it tight on a few injector harnesses...
  12. 1993whtstang

    Bbk Mass Air Flow Sensor For 19 Lb Injectors And Cold Air Intake

    I only had this on my car for 6 months before i upgraded the engine and changed to 24 lb injectors. This is for the 19 lb injectors with cold air intake. Paid $229. it is in like new condition and I have the original box, I will take $165 shipped. Here is the part...
  13. 1993whtstang

    Which Coolant Bottle Will Fit??

    I just put in a new mischimoto dual fan radiator and radiator shround kit in my 1993 mustang gt. I bought a Canton polished aluminum aftermarket coolant reservoir bottle for my year, make, and model, but there is no way it will fit unless the battery got relocated. I have some room on the other...
  14. 1993whtstang

    Which Aftermarket Hood Suggested??

    I was wondering what everyone likes for an aftermarket hood. 1.5", 2", 2.5" or 3" high cowl hood?? Also do you recomend a steel or fiberglass hood?? My body guy mentioned that sometimes the fiberglass hoods have to be shaven on the sides so the lines match? I was looking on LRS and they make a...
  15. 1993whtstang

    painting front and rear windshield molding

    I am having some body touch up work done and was wondering if anybody has ever painted the window molding that goes around the front and rear windshields ?? Also has anyone done this by just taping it off and leaving the moldings on the car while being painted?? I bought the mustang black...
  16. 1993whtstang

    should I switch from 3:55 to 3:73 gears with new mods??

    My mechanic just installed new 3:55 gears with all new bearings and a new traction lock housing about 5 months ago. I also installed a new ford racing cradle rear end cover. I am going to be installing a trick flow top end kit with headers, 75mm throttle body, new MAF, 24 lb injectors, 255 lph...
  17. 1993whtstang

    Thank you to Rick 91GT at RNH performance! great guy to deal with!

    I spent some time on the phone with Rick at RNH performance from this website and he took the time to answer all my questions on a trickflow engine kit, injectors, MAF, throttle body and some other goodies. He provided me with a quote within 2 days and set me up with a great trickflow package...
  18. 1993whtstang

    4 original 5 star pony rims with like new tires!

    SOLD!!
  19. 1993whtstang

    Expired Excellent condition stock H-pipe with cats off 1993 gt 5.0

    I have an excellent condition stock H-pipe with cats off my 93 GT 5.0 . The car only had 69,000 miles after it came off for my aftermarket exhaust. The car was always garaged so it is in excellent shape. The flanges are all there and in excellent shape. I'm asking $200 plus shipping. Im in...
  20. 1993whtstang

    equal length or regualr shorty headers?

    Im looking at the BBK equal length ceramic coated headers for my 93 gt when I do my trickflow kit, has anyone used these? do the equal length headres fit ok? Do you suggest the regualr shorty headers over the equal length instead? Thank you!
Top Bottom
Back
Forums
Menu