Search results

  1. Jsun3701

    PCV problem?

    The passenegr side PCV hose near the valve cover is crushed under a vaccum. How do I replace the PCV. I cant seem to get it off?
  2. Jsun3701

    Tire, question

    Alright before I buy them just to make sure 275/40 17 will fit the stock GT rims. Front and rear right?
  3. Jsun3701

    Long tube question

    I have a engine hoist , would it be easier to disconnect the motor mounts and transmission, hoist the engine out to install the headers. Then lower back in? I know I would have to disconnect the Radiator and isnt that about it? Has anyone tried this or have any input on the idea.
  4. Jsun3701

    Made the switch

    :D I made the swith to Synthetic. I used Pennzoil 5-30, it was buy one get one free? With the morotrcraft fliter and a quart of Lucas full synthetic additive. My early morning piston slap went away my engine runs much smoother and quieter. Totally satisfied.
  5. Jsun3701

    Changing to synthetic, weight reccomendations?

    Im changing my oil to synthetic before I drive to Philly this weekend, reccomendations on what weight I should use? Yes Im using the Mobil 1 filter. Also throwing in some Lucas. Not looking to start a long thread, just asking if you have made the switch, what witch weight gave you the best...
  6. Jsun3701

    Videos of different exhaust combos???

    I am thinking about making some changes. I got the itch. So I know long tubes but which ones? It might make a good thread if people put recordings of their cars and listed the exhaust combos. I know people describe their combos but audio would be fantastic. Also I have access to a engine hoist...
  7. Jsun3701

    Thinking bout the switch Petro to Syn oil

    So what are the pros and cons of the switch. Dont care about the cost of the oil just the life and performance of the engine. My car has 56 k on it. Is it ever too late to switch.
  8. Jsun3701

    Changed my T-fluid and Greased the TO (PICS)

    Greased the TO and changed the T fluid. Put in a little Lucas oil. Havent driven any distance yet to break it in. Just a tip make sure you have a funnel and heat the Lucas oil up. Makes it much easier to pour in.:nice:
  9. Jsun3701

    3650 Fluid Type, amount ...additive

    So whats the concensus Mobil 1, Royal purple, Redline, Dexron III. Should we use a petroleum based fluid or a synthetic. And whats the the best additive. Do we put in 3.2 quarts or 3.7 or 3.0. Need some feed back on this one. Also Lucas or some other additive? The manual is a bit cryptic on the...
  10. Jsun3701

    LUCAS OIL, TRANS and ENGINE

    So whats the deal, I just changed the transmission fluid on my buddies MACH1. He said he Website said to put Lucas in with the tranny fluid. So how good is this stuff. Will It help a 3650 that sticks in the cold. Will it help that early morning piston slap. If you have used it please tell us...
  11. Jsun3701

    Need help asap

    Do wheel spacers go behind the rotor Or do I have extra long studs?
  12. Jsun3701

    At what point will one begin to run lean?

    :spot: I was talking with a bud today and I told him I heard a noise when I start the Stang in the morning(Like a couple of marbles bangin around). Pretty much just during initial start up or after its sat for a while. He suggested I may be running lean, and hearing some detonation. So at what...
  13. Jsun3701

    Pulley pics

    :rolleyes: Anyone have any pics of Steeda pulleys installed.
  14. Jsun3701

    Steeda Tri-ax

    I have the chance to buy a Steeda triax for $100. Its got about 15k on it. is there such a thing as too many miles on a shifter?
  15. Jsun3701

    Finished my pulley install

    :nice: Well lets see, first Ill tell you its easier than I thought. I thought I would have a problem getting the crank bolt out, nope easy. But, Ill tell you guys using the Harmonic pullint tool, took 4-ever. But Im done, glad I did it. No real noticable gain other than the car gets to higher...
  16. Jsun3701

    Strut tower brace

    Will the stock strut tower brace from a 96 Gt fit a 2002 gt?
  17. Jsun3701

    NEED HELP GETTING DARK

    doing a pulley install, is a pain in the but to get the harm balancer off even with a puller?
  18. Jsun3701

    MAC prochamber w cats and Long tubes?

    Anyone running this setup? How does it fit. If I choose to go "offroad"and eliminate the cats do the long tubes bolt right to the prochamber? Pics of long tubes in this situation?
  19. Jsun3701

    Anybody removed their spoiler?

    What did you do with the holes in the trunk?
  20. Jsun3701

    All the bolt ons, After a tune(Diablo/SCT) Dyno results

    Hey fellas just curious if any of you have dyno results after you tuned your car. I have pretty much all the bolt ons cept for Headers. So what could one:eek: expect after a tune.
Top Bottom
Back
Forums
Menu