Search results

  1. MO351

    Electrical problems

    96 Mustang GT. No dome lights, power door lock actuator not working (no power to it), and cruise control not working. All fuses/bulbs/acutator are good. Could a bad keyless entry module and bad/missing illuminated entry module cause these problems (completing a circuit)? I THINK it used to have...
  2. MO351

    How do I identify authentic Shelby wheels?

    These wheels are 15x7 and are supposed to be off of a 60's Shelby. Possibly a 67 or 68. 10 spoke design. How can I tell if they are real or not? They do have CSI stamped on the back of them. Does that stand for Carroll Shelby International? Anything to look for?
  3. MO351

    4 speed stuck in 3rd gear

    66 fastback with 4 speed manual. It's stuck in 3rd gear. Shifter will not budge. Also the clutch won't engage until the pedal is almost all the way up. What are the problems?
  4. MO351

    96 GT Automatic shifting problem

    My 96 GT has the automatic and 87,000 miles. Last night it came up with a problem of taking it's sweet time on a 1-2 shift. If it does shift into 2nd gear it will do it very slowly. I can manually shift into second and it'll hold just fine. Get enough rpms and shift to D and we're good to go...
  5. MO351

    Versailles 9" in a 73 Mach 1

    Will it work? Guess just run the correct backspaced/wider wheels? 71-73 Mustang 61.25 inches 77-81 Versailles 58.50 inches
  6. MO351

    FS: Versailles 9 inch disc brake rear end

    Located near Joplin, MO. I've got a 9 inch disc brake big bearing rear end out of a Lincoln Versailles I'm thinking about getting rid of. It's all there but needs rebuilt. I bought it to rebuild and put in my 67 mustang. I'd have to look again but I believe the gear ratio is a 2.79:1 open...
  7. MO351

    Driver's side door lock and the cruise control

    My driver's side door lock actuator is not getting power. Also my cruise control is not working. Is there any way these problems could correlate to each other? All fuses are fine both inside the car and under the hood. My car is supposed to have remote keyless entry and antitheft. I found the...
  8. MO351

    Blueovalindustries clear light set

    Anyone using this set? How is the fit and quality? http://cgi.ebay.com/ebaymotors/94-95-96-97-Mustang-Cobra-Euro-Headlights-Fog-Lights_W0QQitemZ260006564437QQihZ016QQcategoryZ33710QQrdZ1QQcmdZViewItem
  9. MO351

    Blueovalindustries clear light set

    Anyone ever used these lights? How do they fit and how's the quality? http://cgi.ebay.com/ebaymotors/94-95-96-97-Mustang-Cobra-Euro-Headlights-Fog-Lights_W0QQitemZ260006564437QQihZ016QQcategoryZ33710QQrdZ1QQcmdZViewItem
  10. MO351

    Replace the door lock actuator on a 96 GT

    I"ve searched the site and can not find how to replace the actuator. It's riveted in. What's the easiest way to do this? Do I drill out the old rivet? Is there any way to reinstall without using a rivet? What do I need to do? My Chilton's is useless.
  11. MO351

    Cruise Control not working

    Bought a 96 GT a few weeks ago and the cruise control does not work. The fuses are fine. What else could be the problem? Are there any common problems with the cruise on these 96-up cars? I've searched the forums and didn't get anywhere. The horn works and there's no air bag light on so it's not...
  12. MO351

    Interior: Is it possible?

    Is it possible to redo the entire interior of my 67 mustang for $1000? Upholstery, headliner, dash, etc. Just about everything. Probably not but I was curious if anyone had done it and where the parts were purchased to pull it off.
  13. MO351

    Holley 4V classic finish

    I've got a Holley 4V in the classic finish. What can I do to make it shiny again? It's quite dull. I've had it cleaned and now need to shine it up so it doesn't look like crap under the hood. :shrug:
  14. MO351

    Getting rid of interior smell

    The previous owner of my 90 GT was a smoker. I can't freakin' get rid of the smell! Over the past couple months I've tried some "febreeze" type stuff from Renuzit but that hasn't worked. I've tried leaving the inside of the car all open for a while but that hasn't helped either. Recommendations...
  15. MO351

    A/C for my 67

    Is it possible to change the pullies to a serpentine setup and then use a newer model (say a Fox or SN95) A/C compressor, etc.? Anyone tried it? I've got access to a compressor from a 90 5.0 and was curious if it would work.
  16. MO351

    Oil weight question

    Ok, I just bought a basically one owner 90 GT a couple weeks ago. The owner has used SAE 30 weight Valvoline since day one instead 10W-30 as per Ford's recommendation. It's currently got 141,100 miles on the car. I'm wondering if that heavy of an oil would have damaged anything internally after...
  17. MO351

    Speedometer cable making noise

    Ok. I searched and read quite a few threads but didn't find out how to fix it other than possibly replacing the cable. I saw a few times where it was mentioned about maybe lubing it but then the answer to that particular part was either PM'd to the other party or just not posted. So.......here's...
  18. MO351

    CJ Pony Parts

    Anyone bought from this place? How are they to deal with? What are your experiences with them? They seem to be relatively cheaper on most everything than anybody else. I'm in the process of restomoddin' my 67 coupe and will be buying ALOT of stuff hopefully fairly soon.
  19. MO351

    Add air conditioning

    How much am I looking at to A/C to my 67 289 coupe? Where's a good place to get the kit?
  20. MO351

    Granada proportioning valve

    I'm doing the front disc conversion on my 67 coupe and was wondering if the proportioning valves can go bad? How reliable is it to get one off of a salvaged granada?
Top Bottom
Back
Forums
Menu