Search results

  1. M

    Belt routing with just an Alternator???

    This is how I did mine. The March pulleys are pretty expensive though.
  2. M

    BBK H-pipe

    Yeah, I'm setting up a carb'd 351W in my 87 LX. Thanks for the replies. I have it cap'd off now.
  3. M

    BBK H-pipe

    What is the small 90 degree pipe fitting that right behind the hangars? I blocked off the O2 sensor ports but I'm not sure what the other is for. Your help is greatly appreciated.
  4. M

    exhaust setup question...

    Sorry about the thread jacking but I have a question about my BBK H-pipe. What is the small 90 degree pipe fitting that right behind the hangars? I blocked off the O2 sensor ports but I'm not sure what the other is for. Your help is greatly appreciated.
  5. M

    Carb--> EFI... Can (2) Regulators be used w/EFI Fuel Pump ??

    To answer Mustanman33: I am getting 10-11 psi with the adjustment screw removed. To CrazyPete: Thanks for the info. that's what I'm gonna do.
  6. M

    Carb--> EFI... Can (2) Regulators be used w/EFI Fuel Pump ??

    that's the same FPR that I have now and I can't get the psi low enough. did you modify the stock fuel lines at all?
  7. M

    Carb--> EFI... Can (2) Regulators be used w/EFI Fuel Pump ??

    Now that I'm thinking about it, do I even need to do anything with my stock pickup if I run new lines from the tank to a mechanical fuel pump? Thanks for clearing this up for me.
  8. M

    Carb--> EFI... Can (2) Regulators be used w/EFI Fuel Pump ??

    Thanks for the advice. (jrichker\crazypete) If I went the mechanical route, would I still need a return line? I haven't done the research yet but this seems like a fools proof approach. I am planning on installing a fuel tank insert to replace the stock pickup. I'm just not sure about the...
  9. M

    Any tips on replacing in tank fuel pump with holley blue

    Yes, I'm installing a carb'd setup. I attempted to use the stock EFI pump but couldn't get the psi down low enough. So I am taking the sound advice of others and doing it this way. Sorry for the lack of info in the original post.
  10. M

    Any tips on replacing in tank fuel pump with holley blue

    I will be dropping my tank in the next week or so and replacing the pickup and intank fuel pump with a tank insert and a holley blue. Does anyone have tips or recommendations that will save me some time and #&$^ words? Where should I mount the fuel pump? What size lines and fittings do I...
  11. M

    Carb--> EFI... Can (2) Regulators be used w/EFI Fuel Pump ??

    Good question. Let me know when you find out. I am currently right there with my efi to 351 carb swap. I have stock setup from gas tank to engine compartment, 3/8 hose to FPR, fuel pressure gauge then to carb and I am getting 10-11 psi with the adjustment screw completely removed from the...
  12. M

    Need a suggestion on how to block off tstat to H20 pump bypass hose

    thanks for the feedback. I've been looking for a cap like that. Any suggestion to where I can find one?
  13. M

    351w Swap - Wiring Help!

    The Chilton that I have covers from 79-93. It has proven invaluable.
  14. M

    Need a suggestion on how to block off tstat to H20 pump bypass hose

    Setup: CSI electric H20 pump and March pulleys. This setup eliminates the need for the short 90 degree bypass hose from the thermostat to the water pump. I need to block off the 5/8 outlet from the thermostat. Has anyone done this or can anyone provide a recommendation on the best way...
  15. M

    351w Swap - Wiring Help!

    I got this data from http://www.jason.fletcher.net/tech/efi-carb/efi-carb.htm I am following this as I put a carb'd 351W into my 87 LX and it has been spot on with wire numbers and colors.
  16. M

    Link for Custom brake, fuel and transmission lines

    This could come in handy for someone. http://www.inlinetube.com/
  17. M

    Has anyone run braided or plain rubber transmission lines?

    Any recommendations or issues I should look out for? (other than avoiding the exhaust)
  18. M

    Heater hose fitting

    Do you have a picture of this? That's the problem I am having. I have a 351W intake and an elbow won't clear the intake. I might just get a straight fitting.
  19. M

    Heater hose fitting

    I need to replace the 90 degree heater hose fitting into the intake manifold. Has anyone seen these offered by an aftermarket outfit?
  20. M

    oil pump shaft

    Thanks for the feedback. I finally got it to drop in after about 15 minutes. Of course it was off a bit so I had to pull it and redo it. Within 10 seconds the next time go figure.
Top Bottom
Back
Forums
Menu