Search results

  1. F

    Auto trans vacuum line goes to??

    It is an Edlebrock performer intake. There is a 1/2" plug on the back side of the monifold located on top of it. Will this port work?
  2. F

    Auto trans vacuum line goes to??

    I am putting together a 67 mustang. Where do the vacuum lines connect for the Auto trans AND also the brake booster?
  3. F

    Looking for a one wire alternator

    Pa-performance is where I got mine. Direct bolt in. I also got mine polished. They have many colors.
  4. F

    Where to buy interior paint?

    I want to paint the interior of my 65.(The dash & all the metal parts) Do I need to buy it from a mustang vendor or a paint shop or will Krylon paint do the same job just as well? I have black interior. Should I decide to use Krylon is it a satin, gloss or a flat finish?
  5. F

    Hiding engine bay wires on a 65??

    Perfect! Thanks for the info & the pictures!
  6. F

    Hiding engine bay wires on a 65??

    I need some Ideas and or pictures on how to hide the engine bay wires on a 65 mustang. I have used the search option but cant find what I am looking for. All I find is for newer stangs w/ inner fenders.
  7. F

    Mustang had to hauled away

    I'm not sure how the mechanic adjusted them. I tried to adjust them after the motor was run to break in the cam.
  8. F

    Mustang had to hauled away

    Gilbert/Riggs It WAS a Comp Cams XE262H, Spring press was 110#
  9. F

    Mustang had to hauled away

    The mechanic tore down my engine today. ALL of the cam lobes were wiped out! Prior to starting it I put in an old dist shaft and used my electric drill to run the oil pump for about 10 mins. I purged all of my lines to the gauge and it indicated about 60-65#. When I started it I watched the oil...
  10. F

    Mustang had to hauled away

    Latest up date... They swapped out the ignition to an old points dist,completly elminating the MSD system, They tore the carb down, Had 2 more mechanics look at it. We called Comp cams to verify the firing order. Everyone is scratching their heads. We agreed that he needs to pull the motor and...
  11. F

    Mustang had to hauled away

    The engine builder adjusted the valves the first time,I did it the second time,the shop I took it to did it the third time and the mechanic who the engine builder took my car to on Sunday adjusted them again. It seems like it is not firing on 2 cyls. They checked all of the electrical and it...
  12. F

    Mustang had to hauled away

    The 2 cyls that were not firing were wet w/ fuel. Also the shop checked all of the electrical, MSD 6A box, MSD dist ect. All checked out good on the scope. I was thinking that maybe it could be the pushrods, BUT on only 2 cyls?? He bought a complete cam kit from Comp Cams so everything SHOULD be...
  13. F

    Mustang had to hauled away

    I work in Casa Grande so I will give him a call...
  14. F

    Mustang had to hauled away

    Mustang had to be hauled away I had my 65 289 rebuilt by a good shop but I'm having trouble with it. It fired right up but the valves were making a lot of noise. I didn't want to shut it off until the cam was broke in. After 30 mins I shut it down and pulled the valve covers (maybe a rocker or...
  15. F

    Couple of problems,need advise

    I found the article from Mustangs Plus about the seats but I steel need your help on the other 2 items.
  16. F

    Couple of problems,need advise

    I put in Corbeau GTSII seats in my 65 coupe. They seem to set a little high. Is it very hard to remove the seat platform? I might have to cut it down an inch or so. Also I bought an AC from Classic Auto Air. After I installed it, it started to get hot. 210-220. At Idle it is fine but going down...
  17. F

    New waterpump problem

    I bought my hose from NAPA. I asked them why it didn't have a spring and he told me the reason. Yes NAPA are the better hoses. If it is a cheaper brand that will be prone to collapsing when it gets hot it will have a spring inside it.
  18. F

    New waterpump problem

    The cheaper suction hoses have a spring in them to prevent them from collapsing and causing low coolant flow. The better hoses do not have a spring because they are made better and the rubber will not collapse when the coolant is hot.
  19. F

    WTF is this nipple thing?

    Yep,I agree with krash kendall. It is the pointer for timing your motor. If you bought the radiator from Griffin they will exchange it for you OR you can sell it and buy the right one. Yes use the orginal water pump too.
  20. F

    Oil Change

    We have Babbit bearings,roller bearings & ball bearings just to name a few. All sizes from .5" to 36"diameter. Engines, Basic internal combustion, Jet engines and steam turbines. Water pumps of all applications. Basic principal still applies is to reduce friction to protect the bearing. The...
Top Bottom
Back
Forums
Menu