Auto trans vacuum line goes to??

[fastdave]

I am putting together a 67 mustang. Where do the vacuum lines connect for the Auto trans AND also the brake booster?

 

[66HertzClone]

A manifold vacuum source, a port on the intake or one below the throttle plates on your carb.

 

[mustangman1974]

If its the orignal manifold they gol on a tree port on the back of the manifold. Which ever port you use be sure its full vacuum and not ported. Oh don't hook it up with your PVC. It makes a big mess. A lesson I learned 14 years ago. Hey we all gotta learn the hard way sometime.

 

[HistoricMustang]

A manifold vacuum source, a port on the intake or one below the throttle plates on your carb.

Yep, stick it in on the back of the intake.

HistoricMustang
www.historicmustang.com

 

[fastdave]

It is an Edlebrock performer intake. There is a 1/2" plug on the back side of the monifold located on top of it. Will this port work?

 

[YellowMach69]

The transmission hose should go to a tee type fitting fitted into the the intake,The brake boosteralso should go to that piece,Its a tee type fitting with a large opening for booster and like 3 more smaller ones for Transmission and such simalar to this View attachment 493455 s

 

[HistoricMustang]

It is an Edlebrock performer intake. There is a 1/2" plug on the back side of the monifold located on top of it. Will this port work?

Yep, I just did it this past weekend.

HistoricMustang
www.historicmustang.com

 

[fastdave]

Thanks guys! You were a really big help.Thanks YellowMach69 for the pictures.