Search results

  1. Manewaymja2

    Cam Degreeing Retard

    Hey there guys just checking to see if maybe the reason for my lost of power on the top end could be that i may need to retard the cam so as to build more power on when im on the back end of the track. Could that be a factor? I never did degree the cam just dot to dot Its a Supercharged...
  2. Manewaymja2

    Intake Question. TFS R Box for a 347 SC Engine???

    Like heading...Just wondering what you guys think of a 347 SBF SC engine red line at 7000 rpm with a cam in the 600 int/exh with Brodix T1 heads would benifit from a TFS R Intake box over a GT40 lower and a Cartech uper box? Would this be the box of choice? Its a race motor. Thanks
  3. Manewaymja2

    Coil Over Shocks In Rear Question

    Hi guys wondering if anybody running some double adjustable coil overs in the rear, stock location as i only use a 10.5 Tire. Thinking QA1 Dbl Adjstable with Coil Overs. Looking for suggestions on Spring Rate / Shock Extended Length / Valving. Cars is Strickly Strip Now and probly weighs in...
  4. Manewaymja2

    Launch RPM Recomendations..580 RWHP

    Hey guys i know its a question of trial and error with all drag cars, just looking for some ball park figures to start with.. Run doen: 89 Saleen with 347 SBF, D1 Procharger, 80lb injectors, 14lbs boost, Fuel syatem, 116 octane gas, pproper plugs, Vacuum Pump, etc. etc. Built motor Dart Block...
  5. Manewaymja2

    Mororso EVAC pumps. Can they be mounted n work with the 302 Serpentine belt system

    Looking at the Moroso 3 vane EVAC Pump but trying to figure out where it will mount and will that work with a sepentine set up on a 302 SBF. What mods will be involved or what parts are required? Pics of anyone already doing so. Thanks
  6. Manewaymja2

    EVAC Pump..89 Mustang 302..Placement and System

    Hey guys, looking at instaling an EVAC system like either Moroso or GZ etc for Cranckcase EVAC. I wanted to know whats beeing used out there and where are they being installed. I have the Alt. on the Passenger head with no Smog under that, thinking that would be a good spot as the car has Power...
  7. Manewaymja2

    Cant seem to Make the WHP WHY??

    Hey guys, I have been working on a build, its a 347 SBF 9:1 Comp, Brodix 195 cc heads with custom solid roller Cam 588/613 244-255, 1.6 Rockers with 2inch Kooks headers along with a D1 Blower that saw some good levels of boost 13 and up to 17 but its droping off due to some blow off at the...
  8. Manewaymja2

    Brodix T1 Heads 195cc on a SBF..Any good?

    Hey Guys Any of you using Brodix T1 Heads out there on your SBF say on a 331 to 347 with a Solid Roller Set Up? If so any realy good numbers? They have a competion Valve Job, 2.080/1.60, 1.550 Roller Springs, 240 closed 540 open, 68cc chamber. Its what you find on line with a bit more...
  9. Manewaymja2

    Tuner Needed to Travelle / SCT, Fox Mustang 347 SBF Procharger Combo

    Hey Guys Just finished up my Fox Mustang 347 SBF Dart iron Egale with new Procharger Blower and 3 Core intercooler and now looking for a Tuner that will travelle to the Bahamas to complete my Tuning on the SCT set up in my car. We have a Dynojet here so just need a good Tuner whos willing to...
  10. Manewaymja2

    UPR K Member Motor Mount Slots. Which One SBF

    Just as stated guys which Slot to mount my 347 SBF Motor Mounts into on the UPR K Member. There is two Slots and im just wondering which one to use? As when i mounted the Motor Mounts in the Front one closest to the Radiator it seemed a bit more forward than it was on the Stock K Member. So im...
  11. Manewaymja2

    Trans Brake & Shiftnoid. How to wire Up so they arent Trigerd together?

    Hey there guys, this one is for those that know how Transbrake and electric Shiftnoids work. Well i am new to Auto so i am wondering how to wire up my Trans Brake to the switch on the steering wheel from the Trans? and also how to wire up the Shiftnoid on the shifter so as the two does not...
  12. Manewaymja2

    TH400 install in T5 Fox Mustang (Wiring)

    OK guys i have turned one of my Stangs into an allout drag car and therefore swaped to a Th400 just for the fun of it to get some consistant times and maybe some better 60' times with the use of a Transbrake. Well i looking for anyone who has done this with sucess or can help with wiring it...
  13. Manewaymja2

    B&M Proratchet Install in 89 Mustang??????

    Hey Guys any Pics or advice on a B&M Proratchet Install in an 89 Musatng would elp me in the Install. Please just want to know how it was done and what it looked like after install. Please I need all the Help I can get. Here is a link to what it looks like Pro Ratchet Please anyone out...
  14. Manewaymja2

    Adding Inline Fuel Pumps to get more Fuel??????

    Hey guys im looking to add one or two inline fuel pumps to my Stang to help supply more fuel to my expected Horse Power increase. See i have a Holly 255 lph intank fuel pump now that supplies about 456 HP from boost. Well i am upgrading to a 347 and some more boost that should make about...
  15. Manewaymja2

    Where to Find a Nice Drag Car (Mustang)

    Hey guys hope this is posted in the right spot but after getting my Stang ready and moving forward with my Build, a freind of mine is also looking to move up from the 6's in the 1/8th and trying to get into the 5's. He just isnt about to build his car like i am going to do so he sold his and is...
  16. Manewaymja2

    Procharger 4 Sale P600 / Intercooled

    Up for sale Low mile Procharger P600 with all the pipes and Intercooler, as its my weekend warior and not a daily driver, selling as im doing a motor swap and a bigger Procharger. This Is a very nice Blower and gave my stock 306 allot of hell and manage to help crack the block. $1500 for...
  17. Manewaymja2

    1100 HP N/A. Is It Possible & How

    Guys was just searching the net trying to find what was out there in terms of a N/A SBF or BBF that could get 1100 HP in N/A Form. Any Info:nice: Thanks
  18. Manewaymja2

    Mustang Specialties. Anyone heard of them / Any Good???

    Hi there guys found a company called Mustang specialties located in Pompano Beach FL. And was wondering if anyone here had used them or heard good or bad about them looking to have my work done there. Anyone?????????????
  19. Manewaymja2

    331 SBF with Procharger (F1R????)

    Hey guys just broke up my Stock 306 SBF and thinking on a 331 Dart Block based motor with a Procharger like F1R. Trying to get into the 800 - 900 RWHP area. What are you guys take on this? all ideas and advice would be greatly appreciated as im going to do this in short order. Just would like to...
  20. Manewaymja2

    SBF With 900 HP / Is this Possible / HOW

    Hey huys i was wondering if there is any advice on how to get a SBF say 331 or 347 with a Procharger up to 900 Crank HP. Can This be Done :shrug: and if So would say a 331 Dart Sportsman block with dished pistons (-14.2cc) along with Performer RPM Heads, Procharger P600 up to 14psi, and a...
Top Bottom
Back
Forums
Menu