Search results

  1. M

    Help Id This Holley Carb

    Im thinking this is a Holley 4160 series since it doesnt have a rear metering block, but all the other 4160 carbs i have seen have a choke on them. The number i found on the carb haven't been much help. I know its a 750 cfm just trying to figure out what model it is.
  2. M

    Got spark, fuel and compression, but wont start.

    So a few weeks ago I screwed up and fried my Malloy ignition box. Got the new one in a few days ago and want to get the car running agian. Right now it just turns over but dosent sound like its even trying to start. I have a malloy Hyfire VI ignition box, coil and a unilite dist. It's...
  3. M

    Mallory Unilite module

    My module in my distributor went out and i've order another but i have no idea what caused it to go bad. I was driving down the road and th car just shut off. I trouble shooted it according to Mallorys web site and the module was reading 1.25V when i place a credit card between the optical...
  4. M

    Holley carb tunning

    When my car is at idle i rev the motor and let of it quickly and the car will die. I checked the float levels and they were fine, what else should i check?
  5. M

    CalTracks, Or Ladder bars

    Im really having a hard time choosing between the two and the car is a drag car that likes to be on the street. Engine specs. 408w ported Vic Jrs solid roller cam and an 8-71 BDS on top. It makes tons of torque down low and should be getting mid 10 at my elevation. Im not an experienced welder...
  6. M

    Car makes clicking sound when trying to start?

    When i try to start the car it give me that sound that you get when your battery is dead (the click). But the battery is brand new, and i just replaced the soleniod. today it started fine, i drove it around for about 20min came home and it wouldnt start. When i put the battery jumper on it, it...
  7. M

    Testing gas gauge

    I just put in my new auto meter gas gauge and when i turn the ignition on it barley moves. I put 10 gallons of gas so it should move more than that. Im thinking it might be the sender ans i bought a digital voltmeter to read the omh's but not sure how to do it, or what it sould read. Any other...
  8. M

    Using a throttle cable in a classic?

    I have to use a throttle cable in my 67 and was just wonderinf if anyone has done the same? If so, what pedal did you use and if you haev any tips for installing it let me know. Thanks
  9. M

    Problems installing B&M shifter

    Has anyone put a B&M shifter with the cable exiting in the front in there car? I havea 67 and am having problems routing the cable. It seams like the cable needs to exit in the rear for it to work. Thanks
Top Bottom
Back
Forums
Menu